Table of Contents
Advertisement
Quick Links
P5H-152 User Manual > Introduction
Overview
The P5H-152 is a programmable device that provides Ethernet function. Because this product
equipped a serial port which can be selected to RS485 or RS422, you can connect a variety of serial
devices to a network.
Programming on this product requires the use of PHPoC (PHP on Chip). PHPoC is quite similar in
syntax to PHP, the general-purpose scripting language. Therefore, anyone with experience in
programming can easily learn and use it.
※ Although PHPoC and PHP are quite similar in syntax, they are clearly different programming
languages. Refer to the
PHPoC Language Reference
and
PHPoC vs PHP
for detailed information.
2021-12-10
Sollae Systems
page 1 of 13
Advertisement
Table of Contents
Summary of Contents for Sollae Systems P5H-152
- Page 1 P5H-152 User Manual > Introduction Overview The P5H-152 is a programmable device that provides Ethernet function. Because this product equipped a serial port which can be selected to RS485 or RS422, you can connect a variety of serial devices to a network.
- Page 2 P5H-152 User Manual > Features Features self-developed PHPoC interpreter simple development environment via USB 10/100Mbps Ethernet a serial port which can be selected to RS485 or RS422 6 user-defined LEDs self-developed TCP/IP stacks Web Server WebSocket, TLS various libraries (Email, DNS, MySQL and Etc.)
- Page 3 P5H-152 User Manual > H/W Specification H/W Specification H/W Specification Input Power DC Jack, 5V (±0.5V) Power Current Consumption typical - approximately 273mA Dimension 94mm x 57mm x 24mm Weight approximately 66g 6-pole terminal block, Serial Port an RS422 or RS485 port...
-
Page 4: Supplying Power
P5H-152 User Manual > Layout Layout 1. Supplying Power DC 5V Input This port is the input port for supplying power. The input voltage is DC 5V(±0.5V) and the specification is as follows: 2021-12-10 Sollae Systems page 4 of 13... -
Page 5: Serial Port
NET0 for programming. 3. Serial Port The type of serial port of P5H-152 can be selected to either RS485 or RS422. This port is a 6-pole terminal block and is mapped to UART0 for programming. ※ Setting flow control is required to use RS485 on UART0. For more details, please refer to the PHPoC Device Programming Guide for p40 document. -
Page 6: Function Button
The function button, which is inside the hole of the side panel, is used to operate this product as a button setup mode. 6. USB Device Port for connection with PC The USB device port is to connect with PC. You can access to P5H-152 via development tool by connecting USB cable to this port. 2021-12-10... - Page 7 P5H-152 User Manual > How to Use > Software(IDE) Software (IDE) PHPoC Debugger PHPoC Debugger is a software used for developing and setting PHPoC products. You need to install this program on your PC for using PHPoC. PHPoC Debugger Download Page...
-
Page 8: Usb Connection
P5H-152 User Manual > How to Use > Connecting Connecting Product USB Connection Connect the USB device port of P5H-152 to your PC via a USB cable. Run PHPoC Debugger Select connected COM PORT and press connect ( ) button. -
Page 9: Settings Reset
P5H-152 User Manual > How to Use > Reset Reset Settings Reset Settings Reset makes all settings of your PHPoC products to factory default. Settings Reset Procedure Step Action Product State STS LED Press function button shortly (less than 1... -
Page 10: Web Interface
P5H-152 User Manual > How to Use > Web Interface Web Interface PHPoC itself has a webserver to provide a web interface. When receiving a HTTP request, it executes the php script in the requested file (if there) and respond to the client. Webserver is independent of PHPoC main script. -
Page 11: Setting Passwords
P5H-152 User Manual > How to Use > Setting Passwords Setting Passwords If you set a password for the product, you must enter the password when connecting the product via USB or network. Please refer to the PHPoC Debugger manual page for details. - Page 12 P5H-152 User Manual > How to Use > Escaping Infinite Reset Escaping Infinite Reset PHPoC basically runs scripts when it boots up. Therefore, it is possible that a PHPoC cannot be escaped from infinite reboot when script contains system command such as "reboot". To solve this problem, it is required to stop the running script.
-
Page 13: Device Information
P5H-152 User Manual > Device Information Device Information Device Quantity Path Note /mmap/net0 /mmap/tcp0~4 /mmap/udp0~4 UART /mmap/uart0 /mmap/uio0~1 LED 6(pin #0.30~31, #1.6~9), TXDE(#0.8) /mmap/st0~7 /mmap/um0~3 /mmap/nm0 /mmap/rtc0 ※ Refer to the PHPoC Device Programming Guide for p40 for detailed information about using devices.
Need help?
Do you have a question about the P5H-152 and is the answer not in the manual?
Questions and answers