Advertisement
Quick Links
OPERATION OF THE
Micro EQC is easy to operate using the keys shown in the
following diagram.
This key switches the unit on or off. Press and
hold for more than 3 seconds the unit is on, the LCD
display located at the front of the unit will light up, there
will be no feeling from either lead at this point as the
intensity always starts at zero. Press and hold this key for
more than 3 seconds, the unit will switch off.
Press this key you can go through and select the
parameters one by one.
Press these keys to increase or decrease the
value of the parameter, which has been selected
by MENU key.
Press these keys to adjust the intensity of channel
1 and channel 2. Left side is for channel 1; right
WHAT DOES EACH KEY DO
Micro EQC
- 1 -
Advertisement
Related Manuals for Pain Management Technologies Micro EQC
Summary of Contents for Pain Management Technologies Micro EQC
- Page 1 OPERATION OF THE Micro EQC Micro EQC is easy to operate using the keys shown in the following diagram. WHAT DOES EACH KEY DO This key switches the unit on or off. Press and hold for more than 3 seconds the unit is on, the LCD...
- Page 2 side is for channel 2. Pause key: Press this key to make the unit pause; to continue it, press and hold down this key again. Press this key for 3 seconds can LOCK or UNLOCK the parameters in toggle. When the unit is locked, only intensity and treatment timer can be adjusted.
- Page 3 SPECIFICATION Model: Micro EQC Microcurrent: Frequency 15KHz fixed / 0.5-120Hz adjustable Pulse width 25uS fixed Wave form Upside Mono-Phasic, Downside Mono-Phasic, Alternated Mono-Phasic OTHER FEATURES 1. When the unit is turned on, if any of the keys are not pressed within 5 minutes, it will automatically shut off.
- Page 4 Waveform Information There are 3 types of waveforms: (1). Upside Mono-Phasic Waveform Amplitude Time (2). Downside Mono-Phasic Waveform Amplitude Time (3). Alternated Mono-Phasic Waveform Amplitude Time - 4 -...