Advertisement
The Poly USB OBI WiFi Adapter connects compatible Poly phones to the internet without additional
phone cabling or switches required. Since SIP phones require an internet connection, this gives you the
freedom to take your phone home at a moment's notice or install a phone in a location that otherwise
may be difficult to have a hardwired line.
Before starting you must have:
1. Poly USB OBI WiFi Adapter
2. Compatible Poly VVX (USB compatible) phone with power cord
3. Local WiFi network name
4. Local WiFi network passcode
Please note, depending on the compatible phone model you are using, the screens below may be slightly
different.
To configure the adapter:
1. Connect the Poly USB VVX phone to power.
2. Insert the Poly USB OBI WiFi Adapter into a USB port on the Poly VVX phone.
3. Press Home button
4. Select WiFi
5. Start WiFi setup
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Poly OBI USB WiFi Adapter
- Page 1 To configure the adapter: 1. Connect the Poly USB VVX phone to power. 2. Insert the Poly USB OBI WiFi Adapter into a USB port on the Poly VVX phone. 3. Press Home button 4. Select WiFi 5. Start WiFi setup...
- Page 2 6. Select WiFi then select On 7. Phone must be rebooted- select Yes. 8. After the phone reboots, you will be prompted to set up WiFi. Press Start. 9. Follow the screen prompts to select the desired WiFi network from the list then enter your appropriate WiFi network passcode.
Need help?
Do you have a question about the OBI USB WiFi Adapter and is the answer not in the manual?
Questions and answers