Advertisement

Quick Links

Lifting Unit Type ABS 5 kN
Installation and Operating Instructions
en
Translation from original instruction
www.sulzer.com
GB 0503-E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ABS 5 kN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sulzer ABS 5 kN

  • Page 1 Lifting Unit Type ABS 5 kN Installation and Operating Instructions Translation from original instruction www.sulzer.com GB 0503-E...
  • Page 2 Installation and Operating Instructions for lifting unit type ABS 5 kN Lifting device support, shape A (for pedestal base) Lifting device support, shape B (wall mount base) Sulzer reserves the right to alter specifications due to technical developments! GB 0503-E...
  • Page 3: Table Of Contents

    Installation and Operating Instructions Lifting unit type ABS 5 kN Table of contents General ..............................4 Introduction ............................. 4 Application areas ............................. 4 Application limitations ..........................4 Dimensions ............................. 5 Type designation of the ABS lifting unit and the components ..............6 Nameplate ...............................
  • Page 4: General

    Installation and Operating Instructions Lifting unit type ABS 5 kN General Introduction These Installation and Operating Instructions and the separate booklet Safety Hints contain basic instructions and safety hints which must be observed during transport, installation and commissioning. For this reason it is essential that they are read by the installing technician as well as by relevant skilled operators or users.
  • Page 5: Dimensions

    Installation and Operating Instructions Lifting unit type ABS 5 kN Dimensions The max. lifting capacity for the different overhangs can be obtained from the nameplate on the lifting unit. Figure 1 Dimensions Legend Pulley Post Rope Lifting device support Boom...
  • Page 6: Type Designation Of The Abs Lifting Unit And The Components

    Installation and Operating Instructions Lifting unit type ABS 5 kN Type designation of the ABS lifting unit and the components Type designation of the complete lifting unit: ABS lifting unit 5 kN. Type designation of the rope winch: e.g. “PFAFF Alu-Wire Rope winch 500 kg with two speeds”...
  • Page 7: Safety Instructions For The Operator Of The Lifting Unit

    Installation and Operating Instructions Lifting unit type ABS 5 kN Safety instructions for the operator of the lifting unit Study installation and operating instructions with care! Prior to any operation, the lifting unit has to be checked carefully, including correct guidance in the lifting device support.
  • Page 8: Installation Of The Lifting Device Support

    Installation and Operating Instructions Lifting unit type ABS 5 kN These hints are only supplimentary to the regulations of DIN 15018 and the regulations for the prevention of accidents from the authorities VBG 8, VGB 9a. Furthermore any local regulations are to be observed!
  • Page 9: Assembly And Reassembly Of The Lifting Unit

    Installation and Operating Instructions Lifting unit type ABS 5 kN Assembly and reassembly of the lifting unit Before first assembly all parts have to be checked whether they are all available and correct according to the parts list. Before first operation of the assembled unit including support it has to be inspected by an expert. A written report on this inspection is required. (See attached check list.) Legend Lifting device support Lower bearing Upper bearing Post Handle grip...
  • Page 10: Installation Example

    Installation and Operating Instructions Lifting unit type ABS 5 kN Load max. 300 kg [662 lb] at a max. overhang of 1.30 m [51 in]! (only for boom 1500 mm/59,1 in) Load max. 300 kg [662 lb] at a max. overhang of 1.75 m [69 in]! (only for boom 2000 mm/78,7 in) Load max.
  • Page 11 Installation and Operating Instructions Lifting unit type ABS 5 kN Manufacturer: Sulzer Pump Solutions Germany GmbH, Scheiderhöher Str. 30 – 38 D-53797 Lohmar Year of production: __________________________ Serial no.: ________________________________ Lifting capacity: ____________________________________________________________ Manufacturer of rope winch:__________________________ Type: _____________________ Lifting rope: Diameter: Ø ___________ mm Min. breaking load:___________ kN Check before first operation: On:______________ By:________________________ Recur checks (at least once a year) Repaired Date Result Signature Hints for checks by an expert Are the nameplate, load rating and warning labels complete and readable? Check the post, boom and lifting device supports regarding damages, wear, corrosion and deformation.
  • Page 12 I Sulzer Pump Solutions Germany GmbH I Scheiderhöher Straße 30-38, D-53797 Lohmar, Germany I I Tel. +49 22 46 900 0 I Fax +49 22 46 900 200 I www.sulzer.com I GB 0503-E...

Table of Contents