Advertisement
Installation(SBP-301HM2/SBP-301HM5)
1 Insert the Hanging Mount Adaptor to 1.5" NPT screw-thread (female) pipe or
to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/
300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
J
`
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5"
NPT screw thread on the Hanging Mount Adaptor. If not secured tightly, the
Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical
damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2 Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
`
<Vandal Dome Camera>
<Plastic Dome Camera>
Installation(SBP-301HM3/SBP-301HMW3)
1 Insert the Hanging Mount Adaptor to 1.5" NPT screw-thread (female) pipe or
to the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM or 300WM1/
300CM/300LM) and turn it clockwise to secure to the Pipe or Adaptor.
J
`
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5"
NPT screw thread on the Hanging Mount Adaptor. If not secured tightly, the
Hanging Mount Adaptor may loosen from the Pipe or Adaptor, causing physical
damage or malfunction.
(Make sure you check the connection between two components before
proceeding with the next step.)
2 Install the Hanging Mount Adaptor onto the camera.
Make sure you insert the Adaptor in the right direction.
`
PT01-001879G
Advertisement
