Summary of Contents for VESTEL 495 Series
- Page 1 xx495 OVERLAY TOUCH KIT ASSEMBLY SHOWN LOGO PLATE (BOTTOM / RIGHT POSITION) SHOULD BE DISASSEMBLED. PLEASE KEEP SCREWS FOR FURTHER USE.
- Page 2 xx495 OVERLAY TOUCH KIT ASSEMBLY OVERLAY TOUCH KIT SHOULD BE PUT ON SMOOTH SURFACE (ETC. CUSHION). CABLE DIRECTION SHOULD BE ON BACK.
- Page 3 xx495 OVERLAY TOUCH KIT ASSEMBLY TV PRODUCT SHOULD BE PUT ON OVERLAY TOUCH KIT CAREFULLY.
- Page 4 xx495 OVERLAY TOUCH KIT ASSEMBLY SCREW M4X16 TOTAL SCREW: 16 PCS (TORQUE: 0,9Nm ±%20) CABLE POSITION WARNING: CABLE SHOULDN’T BE DAMAGED!
- Page 5 xx495 OVERLAY TOUCH KIT ASSEMBLY SCREW M4X16 3 PCS (TORQUE: 0,9Nm ±%20) OVERLAY KIT SHOULD BE ASSEMBLED BY METRIC-4 SCREWS TO ONLY “M” MARKED HOLES ON PLASTIC PARTS.
- Page 6 xx495 OVERLAY TOUCH KIT ASSEMBLY USE CABLE HOLDERS FOR CABLE POSITIONING.
- Page 7 xx495 OVERLAY TOUCH KIT ASSEMBLY PLEASE ASSEMBLE SCREW M4 1 PCS LOGO PLATE. (TORQUE: 0,9Nm ±%20)
Need help?
Do you have a question about the 495 Series and is the answer not in the manual?
Questions and answers