Page 1
XWG-098 INSTRUCTION MANUAL 13 FT x 15 FT Wood Framed Gazebo The gazebo comes with 5 boxes. Sometimes they may be delivered on different day, please wait 2-3 more days or contact us for help...
Page 2
Note: The gazebo needs to be installed in cooperation with six people. The following tools are not included and needed for assembly: Pistol Drill Tape Measure Hammer Screw Driver 2 m Adjustable Ladder 6 people Warning 1. A 6 person assembly is required for this gazebo. 2.
Page 3
Attention: 1.Please fix all the screws first,do not lock off,after assemblling is fully completed, lock all at once finally. 2.Please check the manual carefully and make sure you have received all the parts. 3.If there is any missing,please let us know the letter of the parts you need. 4.If there is any damage,please send clear photos to us,we will check and offer you best solution soon.
Page 4
L9-2 L9-1 Short beam of Le� baffle tube of small Right baffle tube of Short beam of small Upper short beam small roof long side roof long side small roof long side roof short side of large roof 4 PCS 2 PCS 2 PCS 2 PCS...
Page 5
Q type ring Hex Head Screw M6*25 Stake ø8*180 Cross outer hexagon M3 Drill bolt M6*35 8 PCS 16 PCS 2 PCS 16 PCS 120 PCS M6 wrench M8 Allen wrench M10 wrench 2 PCS 1 PCS 2 PCS Parts List (Box C) Small roof fastening piece Long top tube of large roof Bevel beam of small roof...
Page 6
Parts List (Box E) Right long beam of Middle beam of Beam of Beam of external short side external long side internal short side internal long side 2 PCS 2 PCS 4 PCS 4 PCS 2 PCS Bevel support tube 1 Bevel support tube 2 Connector for middle beam 4 PCS...
Page 14
<8> d1=d2 10 4x Rt 90 Tips: Before step 9, please measure the length until d1 is equal to d2, so to ensure the legs are completely straight on the ground, and the beams are also at the right place, that is vertical to the legs. 11 4x M8x35 M8x35...
Page 15
<9> Attention: Just put the part #J on the beam, but don't lock them off with screws. M5x30...
Need help?
Do you have a question about the XWG-098 and is the answer not in the manual?
Questions and answers