Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Artforma LED Hexagon Mirror
Summary of Contents for Artforma LED Hexagon Mirror
- Page 1 Instruction / installation manual of LED Hexagon Mirror...
-
Page 2: Necessary Tools
Thank you that you decided to buy our product. We made all our products taking care of each detail and we subject them to multiple tests. We are convinced that you made a purchase that will serve you for a long time. NECESSARY TOOLS A pencil A drill bit (6 mm) - Page 3 SECURITY Warning, glass! Place the mirror only on a soft surface. Frame corners are particularly susceptible to mechanical damage. Good Wrong Do not hang the mirror on movable elements of the interior equipment. Do not stick the mirror to the wall with mounting tape. Make sure the surface on which you want to hang the product will withstand the load on the mirror.
- Page 4 PREPARATION FOR MONTAGE First, open the package. Remember not to place the mirror on a hard surface as this may damage the product. Check if the package contains all the elements (product received according to the order, assembly elements). Then take the mirror out of the packaging and place it on a soft surface (you can use a folded towel for this).
- Page 5 Instruction for mounting on the wall 1. In order to determine the place for mounting on the wall, measure the distance between two handles attached to the mirror. 2. Use these measurements to mark two points on the wall that will serve you to drill holes.
- Page 6 Instruction for mounting on the wall 3. Make sure that the distances between handles on the mirror and points marked on the wall are the same. Check whether there is no installation in places that were determined to make holes there. If there is any installation in the wall, choose another place for the mount.
- Page 7 Instruction for mountin one the wall 10. Hang the mirror on the "L" mounting hooks. Use the element marked in red to adjust the distance between the shelf and the wall. Use the element marked in yellow to adjust the height of the holder (up / down).
- Page 8 GUIDELINES RELATING TO CLEANING AND MAINTENANCE If blurs remain on the glass after removing the protective film, use the included glue remover. You can eliminate any streaks with a glass cleaner. Use only agents intended for cleaning of glass surfaces and a dry microfibre cloth for everyday maintenance of the mirror.
- Page 9 FORAM Sp. z o.o. sp. k. Karpicko, ul. Jeziorna 3, 64-200 Wolsztyn Mail EU: info@artforma.eu Mail PL: biuro@artforma.eu +48 68 422 73 65 We are at your disposal from Monday to Friday from 9am to 3pm.
Need help?
Do you have a question about the LED Hexagon Mirror and is the answer not in the manual?
Questions and answers