Advertisement
Quick Links
Wireless Bone Conduction Headphone
USER GUIDE
Specifications
Pairing Name: M100
Bluetooth Specification: V5.1, dual mode, downward compatible.
Frequency Range: 2.4GHz-2.480GHz
Supported Protocols: A2DP, AVRCP, HFP, AAC, etc.
Two Bluetooth devices can be connected at the same time.
Transmission Distance: up to 30 meters (Transmission distance varies depending on the
environment and Bluetooth device)
Maximum Talk/Play Time(70% Volume): 6 hours
Standby Time: 200 hours
Working Temperature: 0℃ to 45℃
Speaker:
Frequency: 300Hz-9KHz, Hi-fi
Distortion:≦1%
Sound Channel:
Stereo
Microphone:
Dual microphone noise reduction technology
Advertisement
Related Manuals for Mairdi M100
Summary of Contents for Mairdi M100
- Page 1 Wireless Bone Conduction Headphone USER GUIDE Specifications Pairing Name: M100 Bluetooth Specification: V5.1, dual mode, downward compatible. Frequency Range: 2.4GHz-2.480GHz Supported Protocols: A2DP, AVRCP, HFP, AAC, etc. Two Bluetooth devices can be connected at the same time. Transmission Distance: up to 30 meters (Transmission distance varies depending on the...
- Page 2 Headset Battery: Type: Lithium-ion polymer Battery Capacity:180mAh Charging Voltage: 5V DC(≤24V) Life Time: Minimum recharging 1000 times Operating Temperature: -10℃ to +60℃ Charging Time: 1.5 hours Charging Interface: Type C USB Waterproof Rating: IPx6 Net Weight:...
-
Page 3: Wearing Instruction
Wearing Instruction: As shown in below picture, hang the headphone on your ears, rest the bone conduction transducers on the cheekbones in front of your ears. Please do not hang the transducers on your ears. Button Function: Button Function Action Power on Press plus button and hold on for 4 seconds Power off... -
Page 4: Pairing With Bluetooth Device
Open “Bluetooth” menu and press “discover” or “add” to search “M100” on your smart phone, laptop or desk phone. When M100 shows on your Bluetooth devices list, please click it to start pairing. Prompt tone “connected” will be heard when pairing is successful, and the blue light flashes every 10 seconds in the state of breathing. -
Page 5: Function Introduction
2) Turn off the Bluetooth function of the first device 3) Connect the second device with M100 4) Turn on the Bluetooth function of the first device, click to reconnect “M100” on Bluetooth list. Headset is now connected with both devices. - Page 6 Out of Warranty: 1. Remove the in-built battery artificially 2. Fail to follow the user manual or disassemble the headphone 3. Incorrect connect with high voltage device for charging which causes headphone damage. 4. Artificial damage caused by impact, falling, water, pulling. CHECKING FCC Statement This device complies with part 15 of the FCC rules.