Page 2
Dolby® Information - Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Digital STREAM Technology, Inc. is not for any direct, indirect, incidental or consequential damages in connection with the use of this material.
DST-HD1100E TABLE OF CONTENTS DST HD 1100E: HDTV Digital Receiver ... 4 Front Panel Controls and LEDs ... 4 Rear Panel Jacks ... 5 The Remote Control ... 7 Reviewing the Remote Control ... 7 Operation ... 9 The On-Screen Menu System... 9 Viewing the Display ...
DST-HD1100E 1. DST HD 1100E: HDTV Digital Receiver 1.1 Front Panel Controls and LEDs ① ② ③ ① STANDBY/ON Press to turn the power on or off. ② Press to make a selection when using the on-screen menus. ③ Left/Right/Up/Down Use to change channels or to move on-screen menus.
DST-HD1100E 1.2 Rear Panel Jacks ① ② ④ ⑤ ⑥ ⑦ ⑧⑨ ⑩ ① VIDEO OUT If your TV or monitor has Audio/Video capability, connect this jack to the AV Input jack on your TV or monitor using an Audio/Video cable.
Page 6
DST-HD1100E ⑦ Left/Right ANALOG-AUDIO OUTPUTS(with Analog Video Output) Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs). Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these terminals when you use analog for video.
DST-HD1100E 2. The Remote Control 2.1 Reviewing the Remote Control The HDTV Digital Receiver remote control and on-screen menu system work together to make operating the HDTV Digital Receiver as simple as possible. HDTV DIGITAL RECEIVER POWER Press to turn the power on or off.
Page 8
HDTV DIGITAL RECEIVER DST-HD1100E CH+, CH- (Channel Up and Down) Press to change channels. Minor Channel UP/DOWN( Press to increase or decrease the minor. While using the on-screen menus, press to activate (or change) a particular item. Otherwise press SEL to display information...
DST-HD1100E 3. Operation 3.1 The On-Screen Menu System The seven menu controls are located in the center of the remote control: MENU, UP(Channel Up), DOWN(Channel Down), LEFT, RIGHT, SEL(SEL), ESC(Previous Menu). 3.2 Viewing the Display You can quickly check the status of many of the HDTV Digital Receiver features and options by pressing the SEL button.
HDTV DIGITAL RECEIVER DST-HD1100E 3.3 Using the EPG (Electronic Program Guide) Press the MENU on the remote control. Press the UP or DOWN on the remote control to highlight the “EPG” icon and press SEL.
Page 11
HDTV DIGITAL RECEIVER DST-HD1100E Press the Arrow buttons on the remote control repeatedly to move to the channel with program information. You may now: • Obtain additional program details: By pressing the UP, DOWN, RIGHT or LEFT button to highlight a program title and press SEL.
HDTV DIGITAL RECEIVER DST-HD1100E 3.4 Changing the Screen Format Your selection in the Screen Format menu depends on the type of TV or monitor you are using with your HDTV Digital Receiver. Press the MENU button on the remote control.
Page 13
DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Display Mode” icon and press SEL. Press the UP or DOWN button on the remote control to select your Monitor Type either 4:3 or 16:9 and press the RIGHT button to highlight “Display Mode”...
Page 14
HDTV DIGITAL RECEIVER DST-HD1100E With a 4:3 Ratio TV or Monitor If you are using a 4:3 ratio TV or monitor and receive an image with a 16:9 ratio, you need to specify how the image is displayed. Wide(Letter box) Choose this when receiving a 16:9 image and you want to see the original wide format.
DST-HD1100E 3.5 Choosing a Digital Sound Format (Dolby Digital or PCM) Both audio and digital sound are available from the rear-panel connectors of the HDTV Digital Receiver. The digital audio output is an optical connector labeled “SPDIF Output.” After connecting the optical digital-audio component, you must specify the transmission format (PCM or Dolby Digital, as appropriate to your particular equipment).
Page 16
DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Digital Audio” icon and press SEL. Press the UP or DOWN button on the remote control to highlight “Dolby Digital” or “PCM” and press SEL to save the format.
DST-HD1100E 3.6 Setting Messages) How to Activate or Deactivate the On-screen Captions Press the CC button on the remote control. Press the CC button repeatedly to alternate between “English” and “Off”. * The current HDTV Digital Receiver supports ‘English’ only.
DST-HD1100E 3.8 Selecting “Input Type”(Air or Cable) You can select 'Air' for terrestrial broadcast and 'Cable' for cable. Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL.
Page 19
HDTV DIGITAL RECEIVER DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Input Select” icon and press SEL. Press the UP or DOWN button on the remote control to highlight “Air” or “Cable” and press SEL to save the type.
DST-HD1100E 3.9 Memorizing Channels Before you can use any of the special channel buttons (CH+,CH-, FAV-CH), the available channels must first be scanned and memorized. To memorize channels: Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Channel”...
Page 21
HDTV DIGITAL RECEIVER DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Auto Scan” icon and press SEL then “Scan” icon will be highlighted. Press the SEL button on the remote control then HDTV Digital Receiver will scan...
DST-HD1100E 3.10 Adding and Deleting Channels To add channels that were not memorized (or to delete unwanted channels from the memory): Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL.
Page 23
HDTV DIGITAL RECEIVER DST-HD1100E Press the Arrow buttons repeatedly to change a highlighted channel. If you want to delete a highlighted channel then press the CH-DEL button. Press the CH-ADD button when you want to restore deleted channels.
DST-HD1100E 3.11 Setting Your Favorite Channels This menu item helps to memorize your favorite channel into the memory and to select the channel quickly. "Auto Scan" is needed before using this function. Press the MENU button on the remote control.
Page 25
DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Favorite Channel” and press SEL then Favorite Channel window that is located in the right side of OSD(On-Screen Display) will be shown. Press the UP or DOWN button on the...
HDTV DIGITAL RECEIVER DST-HD1100E 3.12 Changing Channels Number buttons Press the number buttons (0 – 9) to enter channel numbers. NOTES 1 Press the SEL button after you select the channel to search “minor” channels then, the list of the minor channels will be displayed on the screen. To select one of them, press Left/Right buttons and press SEL.
DST-HD1100E 3.13 Checking Digital-Signal Reception Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “Signal Strength”...
Page 28
HDTV DIGITAL RECEIVER DST-HD1100E If the signal strength meter indicates “weak”(in red color), physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.
DST-HD1100E 3.14 Fine Tune This function is for analog channels only. Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Channel” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “Fine Tune”...
DST-HD1100E 3.15 Setting Up Time and Date You can set current time and date in this menu. Only when you are watching a digital channel and time information is being transmitted by TV station, you can select "Auto". Press the MENU button on the remote control.
Page 31
HDTV DIGITAL RECEIVER DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Date/Time” icon and press SEL. *Select “Auto” by pressing the UP or DOWN button, and press SEL then both date and time will be set up automatically. To enable this function, you need to set your time zone first in the “Time Zone”...
DST-HD1100E 3.16 Using the Auto Turn-On Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Time” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “Auto Turn-On”...
Page 33
HDTV DIGITAL RECEIVER DST-HD1100E *In case of not using “Auto Turn-On”, select ‘Off’. *Select ’Everyday’ or ‘Once’ by pressing the UP or DOWN button, and press the RIGHT button to set up the time by pressing the NUMBER buttons. You must press SEL...
HDTV DIGITAL RECEIVER DST-HD1100E 3.17 Using the Auto Turn-Off Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Time” icon and press SEL.
Page 35
HDTV DIGITAL RECEIVER DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “Auto Turn- Off ” icon and press SEL. *In case of not using “Auto Turn-Off”, select ‘Off’. *Select ’Everyday’ or ‘Once’ by pressing the...
DST-HD1100E 3.18 Using the Sleep Timer Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Time” and press SEL. Press the UP or DOWN button on the remote control to highlight the “Sleep Timer ”...
DST-HD1100E 3.19 Setting Up the Time Zone Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Time” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “Time Zone ”...
DST-HD1100E 3.20 Using the Daylight Saving Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Time” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “Daylight...
DST-HD1100E 3.21 Setting Up the OSD Transparency Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Function” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “OSD...
Page 40
HDTV DIGITAL RECEIVER DST-HD1100E Press the UP or DOWN button to highlight your favorite OSD transparency and press SEL...
DST-HD1100E 3.22 Setting Up the V-chip Lock This menu item can lock or unlock the programs according to MPAA ratings and TV parental guidelines. Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Function”...
Page 42
DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “V-Chip” icon and press SEL then Enter PIN window will appear. (*PIN =Personal Identification Number) Enter your PIN number by pressing the NUMBER buttons on the remote control and...
Page 43
HDTV DIGITAL RECEIVER DST-HD1100E If you want to unlock the rating controls temporarily, select “Unlock”. Select “Lock” when you want to return to pre-stored rating controls.
DST-HD1100E 3.23 Setting Up the Rating Control This menu item helps you set the detailed control of MPAA ratings and TV parental guidelines. Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Function” icon and press SEL.
Page 45
DST-HD1100E Press the UP or DOWN button on the remote control to highlight the “V-Chip” icon and press SEL then Enter PIN window will appear. Enter your PIN number by pressing the NUMBER buttons on the remote control and press SEL Press the UP or DOWN button on the remote control to highlight the “Rating...
Page 46
MPAA Ratings : All ages admitted Some material may not be suitable for children PG-13 Some material may be inappropriate for children under 13 Under 17 requires accompanying parents or adult guardian NC-17 No one 17 and under admitted Adults only TV Guidelines TV-Y This program is designed to be appropriate for all children.
DST-HD1100E 3.24 Changing PIN You can change your PIN in this menu item. Press the MENU button on the remote control. Press the UP or DOWN button on the remote control to highlight the “Function” icon and press SEL. Press the UP or DOWN button on the remote control to highlight the “V-Chip”...
Page 48
DST-HD1100E Enter your PIN number by pressing the NUMBER buttons on the remote control and press SEL Press the UP or DOWN button on the remote control to highlight the “Change PIN” icon and press SEL. then Change PIN menu will appear.
DST-HD1100E 4. Specifications Model Name : DST- HD1100E Coding Algorithm Video Decoding Format Display Format Audio Coding Algorithm Band coverage Functions BroadCasting standard On Screen Display Display Format Selection Antenna Input Video Output Input DTV Output Output Digital Audio Output...