Vitek VT-MV/PLMT Installation Instructions

PRIOR to USE
Install the mount onto a strong structure such as a concrete or steel beam, etc.
Use the supplied accessories when installing the mount to a structure, make sure
that all the screw parts are metallic.
Follow the mounting instructions based on the assigned marks to the camera
or mounting accessory in the Reference Section below.
PARTS SUPPLIED
Mount Adaptor
Instruction Guide
DIMENSIONS
1.93" (49.1mm)
6.06" (154mm)
INSTALLATION
1. Feed the straps through the vertical slits located on the four corner of the mount adapter.
2. Wrap the straps around the pole then use the driver to rotate the screw that is attached at the ends of
the straps. Rotating the screw shorten the straps thereby fastening the mount around the pole.
3. Attach the cameras* to the pole mount adapter predetermined their mounting holes.
(*) Using the supplied screws with the camera packing you wish to mount.
Straps
L-Wrench
2.5mm, 3mm
0.39" (10mm)
Pole Adapter for AFZ Dome
Cameras and AFZ Bullets
Mounting Screws
M4x20 C-sunk M4x20
Washers
SPECIFICATIONS
Construction: Steel
Finish: Light-gray
Environment: Indoor/Outdoor for a pole like
structure
Pole Size:
3.94" - 7.87" (100~200mm)
Ø
Weight: 2.6 lb (1.2kg)
VT-MV/PLMT