Diamond HEX HA 700.2 Installation Manual page 2

Thank you for choosing a Diamond Audio Technologies HEX amplifier. We sincerely believe that HEX amplifiers have the very best performance
and value. DAT products are engineered and produced with the highest quality materials and incorporate the latest technology. We think you
will find your new HEX amplifier meets or exceeds your expectations and provides excellent value.
Properly installed, your new HEX amplifier will provide years of high quality sonic reproduction. Before installing the HEX amplifier in your vehicle,
please read the entire manual carefully. It is required reading for the protection of your vehicle and for the maximum performance of your mobile
audio system. All HEX amplifiers have been extensively tested and "burned-in" for maximum reliability. If after reading this manual, you still
have questions regarding this product, we recommend that you contact your authorized DAT dealer for expert installation assistance.
If you need assistance with repair or warranty, detailed warranty and return/repair information is listed in the back of this manual. Be sure you
record your serial number, model number and date of purchase for your HEX amplifier as this will be necessary for any returns.
Please Practice Safe Sound!
Continuous exposure to sound pressure levels over 100 dB may cause permanent hearing loss. High powered mobile audio systems may produce
sound pressure levels well over 130dB. Use common sense and practice safe sound.
All Diamond Audio HEX Series Amplifiers Feature:
• Pulse Width Modulated (PWM) MOSFET Switching Power Supply
•Nickel plated, low resistance power and speaker connector blocks
• Thermal, Short Circuit, and Overload (Low Impedance) Protection
HA 700.2 / HA 700.4 / HA 750.1 Features
• Internal 24dB/Octave High Pass or Low Pass Filter (35-350Hz)
• Versatile for Either Full Range or Subwoofers (HA700.2 & HA700.4)
2
Congratulations!
• Extruded Aluminum Heatsink
•Nickel Plated Panel Mount RCA Low Level Audio Inputs
• Power ON and Protection LED Lighting for Easy Diagnostics
• Chassis mounted ATC/ATO type automotive fuses
• Proudly Designed and Engineered in the USA
•Class D Amplifier Topology
• Bridgeable Output Capability (4 Ohms)
•Stable into 2 Ohm Stereo Loads (1 ohm on HA 750.1)
• 12 dB bass boost on HA 750.1
•Crossover frequency range on the HA750.1 is 35Hz-250Hz
• Pass -Thru Line Output for Daisy Chaining Amplifiers
• Remote Level Control on HA 750.1
• HA 750.1 is Sync capable