Bushman MONOPOD V2 Manual

Package contents
The Bushman Monopod V2 includes a simple reliable kit for your 360
camera:
1) Counterweight 400g: is for the stability of the camera on the monopod.
¼" thread on both ends.
2) Bushman Monopod v2: open to a length of 154cm. ¼" thread on both
ends.
3) Jade Tripod: is a 2 position tripod. Lower position is the one that we
strongly recommend for stability. The upper position should not be used in
the windy conditions. Please note that in the upper position it is not always
horizontal.
How to work with the Bushman Monopod v2:
1) Bushman Monopod: With one hand grab all lock and turn them 1/3 of
a turn to open them. Pull all sections of the pole to the length that you
need. Then each lock turn 1/3 of a turn in the other direction to lock them
in place.
2) Jade Tripod: The tripod has two possible positions. For stability we rec-
ommend using the lower position of the tripod. The top ring of the tripod
tripod legs will get loose. They can be tightened with an Allen Wrench.
3) Assembling The classic way of assembling in: Tripod+CW+Monopod.
4) Extra Counterweight. Feel free to add extra counterweight if you want to
increase the stability.
5) Camera: you can screw on your 360 cameras on the ¼" thread on the
top of the pole.
MONOPOD V2
Manual
1
1 2 3
2