®
Technaxx
LED
The Declaration of Conformity for this device is under: www.technaxx.de/ (in bottom bar "Konformitätserkärung")
Features
Dimming and On/Off function by hand movement
Touchable sensor in lamp base
eyes
Comparable with a conventional 20 watt halogen bulb
USB charging cable & AC adaptor included
Product View
Touchfree inductive area
Frosted lamp case
Touchable inductive icon
DC socket
Reset button
Sensor ON / OFF
Make sure the battery is fully charged before use the lamp the first time.
USB Charging
The USB charging cable is included in delivery. Connect it's round end to the DC plug in
the lamp's base, and the other side of the cable to a PC USB port or to an USB 5V adapter*
(* not included).
If the lamp dims even at the maximum lightness or the touchfree function is not sensitive,
it means the power is low and you have to charge the lamp. Fully charged lamp can last
~5 hours (steady light) up to ~3 days (short periods of light).
Touchfree Function (sensor in the lamp's top)
Note: In order to make the touchfree function work well, there should be nothing within min.
1m over the lamp's top (e.g. shelf, ceiling, etc.).
Put the switch "Sensor ON/OFF" at the lamp's base to the ON position.
hand (without touching it) over the lamp's top (max. 20cm distance)
Do it again and the lamp turns OFF.
LED TouchFree 2.5W
User Manual
Charging time takes ~6 hours.
Touchfree sensor on lamp top
Frosted lamp case makes a gentle light, no harm to
For interior lighting only
Built-in rechargeable battery
Easiest handling
Pass with your
The lamp turns ON.