Advertisement
1
INDOOR UNIT DISPLAY
● Display brightness can be adjusted, follow procedure on
2
PREPAPATION BEFORE USE
(see detail in the installation manual)
3
AIR FLOW DIRECTION
1
Press
: Move the louver in
the desired vertical direction.
Press
: Swing the air
2
automatically and press again to
stop.
For horizontal direction, adjust
3
manually.
Note:
Do not move the louver manually by hands or others.
●
The louver may automation positioning by some operation mode.
●
4
REMOTE CONTROL
Infrared signal emitter
1
2
Start/Stop button
3
Mode select button (MODE)
Temperature button (TEMP)
4
Fan speed button (FAN)
5
Swing louver button (SWING)
6
Set louver button (FIX)
7
8
Off timer button (OFF)
9
High power button (HI-POWER)
Economy button (ECO)
10
Clear button (CLEAR)
11
Check button (CHECK)
12
5
AUTOMATIC OPERATION
: Set the desired temperature. Min 17°C, Max 30°C
6
COOLING / FAN ONLY OPERATION
1. Press
2. Press
Cooling: Min. 17°C, Max. 30°C, Fan Only: No Tempeature indication
3. Press
MED+
11
.
7
DRY OPERATION
Note: Dry mode fan speed is set to Auto only.
8
Hi-POWER OPERATION
9
ECO OPERATION
To automatically control room temperature to save energy (except in DRY and
FAN ONLY mode)
10
TIMER OPERATION
11
DISPLAY LAMP BRIGHTNESS ADJUSTMENT
: Select Cool
or Fan only
: Set the desired temperature.
: Select AUTO, LOW , LOW+
, or HIGH
.
: Set the desired temperature. Min 17°C, Max 30°C
.
, MED
,
Advertisement
