Summary of Contents for Jon-Don Prospector PE5003
- Page 1 Priority Manufacturing Prospector PE5003 INFORMATION & OPERATING INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE OPERATING THE MACHINE...
- Page 2 Weight 103 lbs Warranty See Below Machine and Purchase Specifications: RECORD AND RETAIN THIS IMPORTANT INFORMATION Prospector PE5003 Serial Number:_____________________________ Purchase Date: _____________________________ Write purchase location and phone number below _____________________________________________________________________________ ___________________________________________________________ And don’t forget to register your purchase to activate your warranty...
- Page 3 CRITICAL SAFETY INFORMATION & CAUTIONS • To avoid electric shock, do not expose to rain or The acceptable use of this machine is for commercial/professional cleaning, for example, in snow and keep from extremes in temperature. hotels, schools, hospitals, and offices, rather than Store in a heated location.
- Page 4 SYSTEM FEATURES: TOOLS & ACCESSORIES: HEAT: The Prospector PE5003 has a built-in heater for the solution. An ON/Off switch Use only manufacturer’s recommended tools and activates the heater. If you prefer to clean accessories.
- Page 5 VIEWS OF THE MACHINE: FRONT VIEW REAR VIEW Recovery Loading Tank Access Wheels Recovery Hose connects Wand here Holder Recovery Tank Drain Hose Switches Solution Tank Latches Fill Hole Power Cord Pigtails Connect Solution Hose Here Vacuum 1 Switch Vacuum 2 Switch Pump/Heat Pressure...
- Page 6 SET-UP AND OPERATION: 1. Before each use, inspect the machine, hoses, 9. Turn on the vacuum. and cleaning tool for cleanliness and completeness, Ensure the spray nozzles on 10. Begin cleaning, following industry accepted the cleaning tool are tight and that the ball practices.
- Page 7 TROUBLESHOOTING ALWAYS UNPLUG THE MACHINE BEFORE DISCONNECTING OR CONNECTING ANY WIRES OR COMPONENTS SYMPTOM POSSIBLE CAUSE Low pressure Plugged or dirty inlet filter; Pump is leaking Pump valve(s) damaged; Pressure regulator valve is worn and leaking water back into the holding tank even while spraying from the tool;...
- Page 9 Plate, Gauge Mount 41-09507 Ball Float 50-00002 Pressure Regulator/Unloader 41-00004 Clear Lid w/Mounting Plate 41-00007 Quick Disconnect, Male 01-10595-004 Vacuum Tank, Prospector PE5003 31-00002 Washer, High Temperature 41-00050 Hose Barb, for 1-½” Hose 39-00019 Caster 01-10597-004 Solution Tank, Prospector PE5003 40-00007...
- Page 10 Prospector PE5003 WARANTY This limited warranty begins on the date of the customers purchase and is valid and available to the original purchaser only. 10-YEAR LIMITED HOUSING WARRANTY Manufacture warrants that all rotationally molded housing and tanks will be free from manufacturing defects, defects in workmanship, and defects in material for Ten (10) years from the date of original purchase, for the original purchaser only.