PTG ALPHA ATW100 User Manual

OVERVIEW
Thank you for purchasing the Alpha True Wireless Earbuds.
Please read these instructions carefully for proper operation
and save for future reference.
Right Multi-function
Touch Control
Left Multi-function
Touch Control
• Answer/End Call
• Reject Call
• Play/Pause Music
• Virtual Assistant
• Previous Track (L),
Skip Track (R)
Voice Isolating
Microphone
Charging Case
adds 4 recharges
USB-C Charging Port
Wireless Charging
Place case face up on a
wireless charging pad
Note: Fully charge your earbuds before first use.
OPERATION
Turning ON/OFF
Power On: The earbuds will turn on automatically when
you take them out of the charging case, indicated by a
flashing red and blue LED light.
Power Off: Place the earbuds back into the charging
case, and close the cover of the case.
Note: If the earbuds do not turn on or off automatically,
press and hold the earbud touch control until you hear
the voice prompt "Power On" or "Power Off".
Connecting with Bluetooth
To play audio from a Bluetooth device, you need to pair
the device with your earbuds.
1. Power on your earbuds. The earbuds will flash red
and blue.
2. Wait for your earbuds to automatically pair, indicated
by a tone and flashing red and blue LED on only one
earbud.
3. Turn on Bluetooth mode on your device.
4. Select "PTG Alpha Earbuds" to initiate pairing, and the
earbuds will automatically connect with your Bluetooth
device, indicated by the voice prompt "Connected".
The LED lights will turn off on both earbuds. Some
devices ask you to input the PIN "0000" as the
password.