U8185
Maintenance Manual
1. Wear an ESD wrist strap, and ensure that the strap is
grounded properly.
3. Install the PCBA on the front cover. Do not cover
the TP connector FPC under the PCBA.
Issue 1.0 (2012-03-23)
8
2. Install the LCD connector.
4. Install the TP connector, Volume key dome, and
Power key dome, and then snap latch between the
PCBA and front cover in place.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Assembly Procedure
8 Assembly Procedure
16