PROPER DISPOSAL · LITHIUM-BATTERIES IN EQUIPMENT NOTES NOTES PROPER DISPOSAL IMPORTANT BEFORE INSTALLATION INFORMATION ON THE APPROPRIATE DISPOSAL OF PRODUCTS Hot water networks operate at high temperatures and high pressures, which The crossed out wheelie bin symbol on the product or on its packaging indicates can cause serious bodily injury if handled improperly.
INSTALLATION INSTRUCTIONS FLOW RATE SENSOR SCREW-IN HEAT METER · CF-ULTRAMAXX INSTALLATION INSTRUCTIONS FLOW RATE SENSOR SCREW-IN HEAT METER · CF-ULTRAMAXX INSTALLATION INSTRUCTIONS Flow rate sensor screw-in heat meter CF-UltraMaXX PACKAGE CONTENTS INSTALLATION (FIG. 1) • Compact heat meter Turn off the heating circulation pump and close the ball valves. Check the instal- 130 mm 1”...
INSTALLATION INSTRUCTIONS FLOW RATE SENSOR SCREW-IN HEAT METER · CF-ULTRAMAXX INSTALLATION INSTRUCTIONS TEMPERATURE SENSOR · NOTES ON IDENTIFICATION OF IMMERSION SLEEVES INSTALLATION INSTRUCTIONS Temperature sensor INFORMATION ON IDENTIFICATION OF IMMERSION SLEEVES Example of a measuring point mark- IDENTIFICATION OF THE MEASURING POINT TYPE ing for immersion sleeves: When installing the heat meter, the following applies: Immersion sleeves with M12...
INSTALLATION INSTRUCTIONS TEMPERATURE SENSOR DS 6 AND AGFW ACCORDING TO EN 1434 INSTALLATION INSTRUCTIONS TEMPERATURE SENSOR Ø 5.0 OR 5.2 MM INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Temperature sensor DS 6 Temperature sensor Ø 5,0 or 5,2 mm supply T-piece TH INSTALLATION NOTE INSTALLATION NOTE The use of the heat meter temperature sensor is only permitted in conjunction The use of the heat meter temperature sensor is only permitted in conjunction with...
Page 6
CONNECTION DIAGRAM CONNECTION DIAGRAM COMMISSIONING AND SEALING CONNECTION DIAGRAM Options COMMISSIONING (FIG. 1) Small calculator Large calculator Open the ball valves / shut-off valves. Switch on the circulation pump. Check for leaks. Remote display of M-BUS energy / volume PLAUSIBILITY CHECK (FIG. 1) Activate the unit display by pressing the push-button.
Page 7
INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL OPTIONAL DISPLAYS A B C (DEPENDING ON OPTIONS ORDERED) DISPLAY Cumulative cold energy for combi meters, EXPLANATION OF THE DISPLAYS heat energy is displayed in 1.1 Energy year-end key date 1. LCD level consumption data Cold energy year-end key date for combi meters Cumulative energy in kWh, MWh or GJ Volume water meter 1...
Page 8
INSTRUCTION MANUAL INSTRUCTION MANUAL ARRANGEMENT AND OPERATION OF THE DISPLAY...
Page 9
INSTRUCTION MANUAL OPTIONS INSTRUCTION MANUAL OPTIONS INSTRUCTION MANUAL OPTIONS OPTION M-BUS OPTION WATER METER INPUTS OPTION MAXIMUM VALUES Temperature type: The optional M-Bus option allows the UltraMaXX to be The UltraMaXX offers the option of connecting up to These optional displays show the current monthly Temperature difference connected to a wired M-Bus remote reading system.
Page 10
INSTRUCTION MANUAL OPTIONS NOTES OPTION DATA LOGGER Parameters that can be stored The UltraMaXX offers the option of saving predetermined • Volume water meter 1 parameters at a fixed time interval via 4 parallel data reg- • Volume water meter 2 isters.
Need help?
Do you have a question about the Itron UltraLite and is the answer not in the manual?
Questions and answers