Joyetech eVic Quick Start Manual

eVic Firmware Version 1.1
New feature:
1. Real VW adjustment
We change the option 'Power set' name to 'Vapor set'. And then add option 'VV', 'VW' into sub-option 'Switch'
of 'Power set'. When you choose 'VV' or 'VW', you are able to adjust voltage or wattage directly in the main
interface.
distinguish
eVic V1.0 eVic V1.1
2. Atomizer real time detection
Real time automatically resistance detecting，to guarantee you have a real Watt output and a real display
information whenever you change one atomizer.
3. Wattage arrange modification
Due to hardware and software limitations, eVic cannot reach 15W. So we
modified the range to 2-11W. And the range will change depend on the
resistance. e.g. , when you use 2.1Ω, the range will be 4.2W-11W.
4. Fast voltage/wattage adjustment
In the main interface, turn the direction key in one direction three times fast,
then voltage or wattage will be increased or decreased fast automatically.
Turn the direction key in opposite direction to stop.
5. Warning temperature adjustment
We add sub-option 'Current ℃' and 'Alarm ℃' into option 'Temp ℃'. In 'Alarm ℃', you can adjust the warning
temperature and decide when the overheating mark flashes.
distinguish
eVic V1.0 eVic V1.1