Page 1
Pro Mounting System & iPad Pro Platform (Only) Catalog No. 1587 & 1588 50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com...
Page 2
The ultimate accessory! Our terrific iPad Pro system is available in two versions: Mounted and iPad Pro Platform only. The Mounting version comes with a mounting platform, a heavy duty dual arm, and a super clamp. The mounting platform is designed for easy access to all of the iPad’ Pros electronic ports.
Page 3
Tighten Clamp Locking Knob Fig. 2 2. Clamping Options: Our mounting clamp is designed for mounting to tubular (wheelchair, bedrail, walker, etc.) or flat surfaces such as a table top or desk. For flat surface mounting use the included wedge insert shoe stored in front of the locking knob on the clamp (see Fig.3) Loosen locking knob slightly to remove wedge, tighten knob once wedge has been removed.
Page 4
4. Once the arm is in position you can now place your iPad and platform on the arm. First back off the set knob on the iPad Pro platform until it is flush with the inside of the opening. This is necessary to allow the holder to be pushed all the way down on the mounting arm post.
Page 5
Fig. 6 Video: For more detailed setup information please view our setup video at: www.enablingdevices.com and type in the Item no. 1587 in our search box and then click on the results to take you to the video. Pg. 4...
Page 6
Caution: Do not over tighten the adjusting knobs, or try to move or adjust the mounting system after you have tightened the adjusting knobs. Doing so can damage the Mounting System and void your warranty. Care of Unit: The Mounting System can be wiped clean with any mild household multi-purpose cleaner and disinfectant.
Need help?
Do you have a question about the 1587 and is the answer not in the manual?
Questions and answers