Flower House StarterHouse Manual

Self-erecting portable greenhouses
Step 1: Remove Step 2:
your StarterHouse™ StarterHouse™ to
from the pack. The spring open as in "B"
StarterHouse™ is
above.
spring-loaded.
Step 3:
StarterHouse™ into 2
Allow your
panels totaling 8 ft. long.
Step 5:
Secure your
StarterHouse™ using the
supplied stakes. Insert the
stakes into the stake holes
of the skirt at 45° angles as
shown in "F".
Step 6: You must secure your
StarterHouse using the high-wind tie-
downs. Insert one end of the rope
through the D-ring at the top peak, then
through the anchor. Knot the rope
around a stake and insert in the ground
at a 45° angle. Keep as much tension
on the rope as possible
Unfold your
Set up Instructions
Step 4:
Open the
bottom of your
StarterHouse™ so it
stands on its own. As
shown in "D & E"
Step 7:
The vents of the
StarterHouse™ can be secured
open for ventilation. To secure
vents, first unzip them. Roll them
up and then use the straps to hold
the vents in place as shown in "H".
Page 1