Stand on the bottom Step 6: Stand pm the bottom Step 7: Secure your SpringHouse™ using the High-wind tie- corner of the skirting and lift corner of the skirting and lift your SpringHouse™ using the downs. Insert one end of the rope through your SpringHouse™...
Page 3
This will relieve some tension and allow for easier assembly. (See "Ka"). Step 12: The doorways of your SpringHouse™ can be secured open for ventilation. First unzip the top portion of the outer door. Roll it down and secure it with the straps.
Shown above. outside and zip the doors shut. Step 5: Tip your SpringHouse™ over. NOTE: It will not lay flat. Step 5: Fold your SpringHouse™ in half, from 2 panels Push firmly on the center band to spring it back into place so your to one.
Now you can take Parts List: your SpringHouse™ with you anywhere ! SpringHouse™ (78" x 72" x 72") Pre-Assembled Fiber poles Ground Stakes Step 10: Hold your High-Wind Tie-Downs SpringHouse™ between your Shade Cover knees to put it in the pack.