Subscribe to Our Youtube Channel
Related Manuals for Pixapro Li-ion580IIIM
Summary of Contents for Pixapro Li-ion580IIIM
- Page 1 PIXAPRO设计文件图注 项目类型 彩盒 彩卡 白盒 贴纸 说明书 内托 胶盒 吸塑 其他: PIXAPRO_ Li-ion580III M 说明书 项目名称 产品料号 版本 705-V85030-00 成品尺寸( mm ) 展开尺寸( mm ) 80x195 尺寸公差 ±2mm 105g 材质 工艺说明 骑马钉 备注/色值 设计师 陈正丰 校对 杨入人...
- Page 2 Pioneering Li-ion Camera Flash INSTRUCTION MANUAL PIXAPRO Ltd. Before using this product: Please read this user manual carefully in order to ensure your safety UNIT 5 Sterling Park Pedmore Road and the proper operation of this product. Keep for future reference.
-
Page 3: Foreword
Foreword Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp This Li-ion580III M camera flash adopts PIXAPRO wireless conditions. ONE System and 2.4GHz ratio transmission, which is Do not disassemble. Should repairs become necessary, this compatible with HyBRID360 TTL, GIO1, ST-III, ST-III+, ST-IV product must be sent to an authorized maintenance center. -
Page 4: Table Of Contents
Contents Foreword Warning Name of Parts Body Control Panel LCD Panel What’s in the Box Separately Sold Accessories Battery Attaching to a Camera Using the Flash Power Management Flash Output ZOOM: Setting the Flash Coverage M Mode: Manual Mode Multi Mode: Stroboscopic Flash S1 Mode S2 Mode Hi-Speed Sync Triggering... -
Page 5: Name Of Parts
● LCD Panel Name of Parts Multi 19. <M>Manual Flash Mode 25. < > Sound Beep Indication 20. <S1>S1 Slave Flash Triggering 26. < > Sleep Status 21. <S2>S2 Slave Flash Triggering 27. TX Transmitter Mode ● Body 22. <Multi>Multi/Stroboscopic 28. -
Page 6: Battery
Battery Attaching to a Camera • Features Attach the Camera Flash. ● Rotate the hotshoe fixing 1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are 500. buckle to the left and insert 2. -
Page 7: M Mode: Manual Mode
4. M Mode: Manual Mode Maximum Stroboscopic Flashes： Press MODE Selection Button <MODE> to enter M mode. In this mode, you can set the flash unit onto your camera hot shoe or Flash output your trigger hot shoe for firing. Before shooting, adjust the flash power output. - Page 8 SET button to choose ID and turn the select dial to select ID from OF, 01 to 99. •Under poorly-lit or low-contrast • As Li-ion580III M adopts PIXAPRO wireless ONE System, it is conditions, you can press < >...
- Page 9 13. Custom Function - Sleep Function 14. Custom Function - Sleep Function • This product is equipped with Custom Function Settings & Operation Function Description Sleep Function to avoid battery Signs drain when the flash unit is idle. 1. Press <MENU> button to enter Custom •...
- Page 10 Protection Function Advanced Application 1. Over-Temperature Protection Bounce Flash ● ● To avoid overheating and deteriorating the flash head, do not fire By pointing the flash head toward a wall or ceiling, the flash will more than 30 continuous flashes in fast succession at 1/1 full bounce off the surface before illuminating the subject.
- Page 11 Using the Wide Panel ● Technical Data Pull out the built-in wide panel to enlarge the flash lighting range, so as to get more softened and natural lighting effect. Li-ion580III M Model Pull out the wide panel and place Power (1/1 output) 76Ws it over the flash head as shown.
- Page 12 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Li-ion580IIIM and is the answer not in the manual?
Questions and answers