Setting Your Regional; Area Code - GE 29393 User Manual

S Y
ETTING OUR
A C
REA ODE
Like the Local Area Code, 6 sets of Regional
Area Codes can also be set.
1. Press the OPTION button.
SET OR
2. Press either REVIEW (
until REGIONAL AC'S-1 appears.
3. To enter or change the area code, press
the OPTION button again.
NOTE: During first time set up, "— — —"
shows in the display and the left-most dash
flashes, indicating the unit is ready to accept
the first regional area code. When changing
a regional area code, the left most digit
flashes.
4. Use the number pad to enter the first
three-digit regional area code. If you
make a mistake, press ERASE to clear all
three digits and re-enter the area code.
5. Press the OPTION button again to enter
the next three-digit regional area code
and repeat steps 4 and 5 until all the
regional area codes are entered.
6. Press OPTION again to store the setting
and return to the REGIONAL AC'S-2
display.
14
R
EGIONAL
appears.
OR ) button
REVIEW button
OPTION button