Table of Contents
Advertisement
Quick Links
HANDHELD HIGH ENERGY IGNITION
Figure 1 – Motivator3™ (Battery not shown, sold separately)
KEEP THIS MANUAL IN A SAFE PLACE
READ THIS MANUAL BEFORE USING THIS PRODUCT
PRECAUTIONS IN THIS MANUAL CAN RESULT IN DAMAGE TO EQUIPMENT
MNL-MOTIVATOR3REVA
REVISION DATE: 2021-DEC-15
Installation and Operation Manual
FOR FUTURE REFERENCE
.
FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY
Chentronics, LLC
50 Ohara Drive
Norwich, NY 13815, USA
TEL: +1.607.334.5531
info@chentronics.com
Part Number:
07171717
,
SERIOUS INJURY OR DEATH
Page 1 of 9
DCO # 13824
.
Advertisement
Table of Contents
Summary of Contents for Chentronics Motivator3
- Page 1 Installation and Operation Manual HANDHELD HIGH ENERGY IGNITION Part Number: 07171717 Figure 1 – Motivator3™ (Battery not shown, sold separately) KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE READ THIS MANUAL BEFORE USING THIS PRODUCT FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY...
-
Page 2: Table Of Contents
Contents 1.0 Important Safety Information......................3 2.0 Definitions ............................. 5 3.0 Chentronics® High Energy Ignition Systems ................... 5 4.0 System Specifications ........................6 4.1 Description of Equipment ..........................6 4.2 Electrical Area Classification and Safety Markings .................... 6 4.3 System Electrical and Physical Specifications ....................6 5.0 Instructions ........................... -
Page 3: Important Safety Information
Installation and Operation Manual 1.0 Important Safety Information Read All Instructions before Using Equipment The instructions provided in this manual have been prepared to serve as a general guide. It is intended for use by qualified personnel with knowledge of equipment of this type. It is not intended to cover all possible variations in equipment or to provide for specific operating problems which may arise. - Page 4 Installation and Operation Manual Safety Symbols used in this manual comply with ISO 3864. HESE SYMBOLS ARE USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY HAZARDS BEY ALL SAFETY MESSAGES THAT FOLLOW THESE SYMBOLS TO AVOID POSSIBLE INJURY OR DEATH Indicates a hazard with a high level of risk which, if not avoided will result in death or serious injury.
-
Page 5: Definitions
Spark – An electric current arc. High Energy Ignition – Electric spark ignition system utilizing high energy sparks for direct ignition of hydrocarbon fuels such as gas, diesel, or #6 oil. (Note: the Motivator3™ is intended for igniting gas only) High Energy Exciter –... -
Page 6: System Specifications
The Chentronics® Motivator3™ is a portable, battery powered High Energy Ignition System. Figure 3: System General Arrangement 4.2 Electrical Area Classification and Safety Markings The Motivator3™ system does not have any approved certifications for use in classified areas. 4.3 System Electrical and Physical Specifications Application:... -
Page 7: Instructions
Operating at a rate higher than the duty cycle could damage the exciter and void the warranty. Do not operate the Motivator3™ without an igniter tip. Without an igniter tip the exciter must absorb the energy pulse, which can damage the exciter and void the warranty. -
Page 8: System Operational Inputs And Outputs
Alert others in area before operating equipment. 6.3 Spark Detection Feedback The Motivator3™ system provides spark detection feedback by flashing a blue light at the top of the exciter. Table 1 provides interpretation of light behavior. Table 1. Spark Indicator Light Interpretation... -
Page 9: Standard Components And Accessories
Installation and Operation Manual 7.0 Standard Components and Accessories The following is a sample of standard parts available for use with the Motivator3™ system. For additional parts and technical drawings please contact Chentronics®. 7.1 Standard System Components Recommended Igniter – 12000500 Recommended Extension Rod –...
Need help?
Do you have a question about the Motivator3 and is the answer not in the manual?
Questions and answers