Related Manuals for Trinity PROFESSIONAL 41 HLRT24111
Summary of Contents for Trinity PROFESSIONAL 41 HLRT24111
- Page 1 OWNERʼS MANUAL PROFESSIONAL 41” STAINLESS STEEL ELEVEN DRAWER TOOL CHEST Model # HLRT24111...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS In using your TRINITY Tool Chest, please observe the following safety precautions: © 2008 TRINITY - 800.985.5506... -
Page 3: Parts List
PARTS LIST Your TRINITY Professional 41” Stainless Steel Eleven Drawer Tool Chest should include the following parts. Before assembling, unpack the carton and lay out all of the parts described below. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service at 800.985.5506 or at customerservice@TRINITYii.com. - Page 4 PARTS LIST BOTTOM CHEST SIDE HANDLE SCREWS (12) SIDE HANDLES (2) SWIVEL CASTER W/O LOCK (2) SWIVEL CASTER W/LOCK (2) REAR BRACES (2) REAR BRACE SCREWS (8) SWIVEL CASTER SCREWS (16) KEYS (2) LINERS (6) © 2008 TRINITY - 800.985.5506...
- Page 5 CASTERS W/O LOCKS (G) on the right side. Position the two SWIVEL CASTERS W/LOCKS (H) on the left side. Insert the (large-sized) SWIVEL CASTER SCREWS (K) through the SWIVEL CASTERS (G,H), and then into the bottom of the Chest. Tighten securely. © 2008 TRINITY - 800.985.5506...
- Page 6 Chests adjoin, and attach the REAR BRACES (I) using the (small-sized) REAR BRACE SCREWS (J). Tighten securely. STEP 4: INSTALLING DRAWER LINERS Simply Place the LINERS (C,M) inside the top compartment and inside of each drawer © 2008 TRINITY - 800.985.5506...
-
Page 7: Usage Instructions
Drawer Slides into the corresponding slots on the Tool Chest Slides, making sure they are properly positioned. Once the brackets are inserted into the slots, completely close the drawer to set all slides in their proper positions. © 2008 TRINITY - 800.985.5506... -
Page 8: Service Parts List
SERVICE PARTS LIST TRINITY Customer Service provides the following replacement parts: 1) HLRT-SH: Side Handle 11) HLRT-SCDRS6: Short 2) HLRT-GL: Gas Lift Complete Drawer 6” 3) HLRT-LINER: Drawer Liner 4) HLRT-SLTC: Tool Chest Slide • HLRT-SCDRS3: Short 5) HLRT-SLDR: Drawer Slide Complete Drawer 3”... - Page 9 SERVICE PARTS LIST TRINITY Customer Service provides the following replacement parts: 1) HLRT-SH: Side Handle 10) HLRT-LCDRS6: Large 2) HLRT-BRACE: Rear Brace Complete Set 6” Deep 3) HLRT-LOCK: Lock 11) HLRT-LCDRS3: Large 4) HLRT-KEY: Keys Complete Set 3” Deep 5) HLRT-SLTC: Tool Chest Slide 12) ...
-
Page 10: Limited Warranty
TRINITYʼs liability for any breach of warranty shall be limited to repair or replacement of the defective part or parts as described above. -
Page 11: Product Registration
PRODUCT REGISTRATION Thank you for purchasing a TRINITY Professional 41” Stainless Steel Eleven Drawer Tool Chest. In order to register your product to receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to FAX 310.347.4134 (2) complete the Product Registration Form online at www.TRINITYii.com (3) or scan and email... - Page 12 WE ARE HERE TO HELP! To receive your replacement part, please fax or email your receipt and product registration along with your name, address and a brief description of your problem to: TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@TRINITYii.com Monday through Friday 8:00 AM –...
Need help?
Do you have a question about the PROFESSIONAL 41 HLRT24111 and is the answer not in the manual?
Questions and answers