Advertisement
Folding Footrest: The footrest can be folded up and out of the way when
the lift is not in use. The footrest must be in the down position when riding
the lift. Sensors are provided in the footrest to detect obstructions. When
an obstruction is encountered, the lift will stop. The direction of the lift may
be reversed so the obstruction can be removed.
Track Obstruction Sensors: Sensors on the unit detect obstructions and
stops the lift when an obstruction is encountered. The same sensor is
used to automatically stop the lift at each end of the track.
Swivel Seat Handle: Swivel seat handles, provided on both sides of the
seat, allow the seat to be swiveled 60° or 90° at the upper landing.
Seat Belt: Seat belt must be securely fastened around waist or chest
before operating the lift. (not shown)
Battery Operation: If equipped, the lift is operated from two 12 volt
batteries and should be connected to AC power to charge the batteries at
all times.
Battery Disconnect Switch: If equipped, this switch (on top of the
chassis) removes battery power to the lift. The batteries will not charge
when this switch is turned off. (not shown)
Keeping Your Lift Trouble Free
Your Excel stairway lift will provide years of trouble free service if you
follow these helpful hints:
•
Do not exceed the lifting capacity of 300 pounds (135kg).
•
Do not operate the lift outdoors. The lift is designed for indoor use only.
•
Do not operate the lift with a child or pet in your lap. The lift is designed
for one person only.
•
Do not use an extension cord to supply power to your lift. The lift's
power cord should be connected directly to the power source.
•
Do not allow weight on seat to be "off center".
•
Do not allow children to play on the lift.
•
Do not stand up on the lift while operating.
•
Do not operate the lift if it has been damaged in any manner.
(continued on next page)
5
Hide quick links:
Advertisement
