Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Fort Manuals
  4. Keypad
  5. ECSPKY
  6. Manual

Fort ECSPKY Manual

Smart security keypad
Hide thumbs

Advertisement

Quick Links

Download this manual
Smart Security Keypad
ECSPKY

Advertisement

loading
Need help?

Need help?

Do you have a question about the ECSPKY and is the answer not in the manual?

Questions and answers

Summary of Contents for Fort ECSPKY

  • Page 1 Smart Security Keypad ECSPKY...
  • Page 2 Appearance The keypad supports up to 50 RFID tags...
  • Page 3 Preparation The ECSPKY is powered by 3 AAA batteries. On first time use, remove the battery strip. 1. Unscrew and open the case 2. Insert the batteries according the battery polarity 3. Close the case and secure with previously removed screw...

  • Page 4: Installation

    Installation 1. Unscrew the case and remove the rear cover. 2. Secure the rear cover to the desired surface, using the supplied screws. 3. Reinstall the main unit onto the installed rear cover, and (using the screw at the bottom) tighten them together. Note: Because of the tamper switch, opening the rear cover of the keypad, when the system is armed will trigger the alarm.
  • Page 5 Setup The ECSPKY operates in 4 different modes; Normal Mode The LED indicator flashes once every 5 seconds Sleep Mode Under Normal Mode, the keypad switches to Sleep Mode if no operation is made for 35 seconds. Press the Arm [ ] or Home Mode [ ] keys to exit Sleep Mode.
  • Page 6 Registering the ECSPKY to a Hub Make sure the control panel is in Connection Mode Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. Type your user code or admin code on the keypad, and then press any of the Arm [ ], Disarm [ ] or Home Mode [ ] keys.
  • Page 7 Usage The keypad can be used as a remote control. Your user code or your admin code will be required before arming or disarming the system, or switching to home Mode or Mute Mode. Arm the System 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it 2.
  • Page 8 Home Mode 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it 2. Type you user code or admin code. 3. Press the [ ] key: The LED indicator will flash once, the keypad will bleep once ,and then send the Home Mode signal to the system.

  • Page 9: Exit Delay

    Settings Enter Setup Mode Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. Type [admin code + #] to enter Setup mode. Default admin code: 123456 Under setup mode, if no operation is made for 30 seconds, the keypad will exit the setup mode automatically.
  • Page 10 Lock / Unlock the SOS button Lock the SOS button 1. Enter the Setup Mode. 2. Type [3410#]. 3. You hear one bleep: the setup is successful. If the SOS button is locked, you will need to press Arm [ ], or Home Mode Emergency Call [ ] to unlock the keypad, then type in either your admin code or user code, then press [SOS] to trigger the alarm.
  • Page 11 Keypress audible indication The keys will bleep when pressed, and this can be enabled or disabled. If the key indication has been disabled, the successfull setup indications will also be disabled. Enabling Keypress Audible Indication 1. Enter Setup mode. 2. Type [3510#]. 3.
  • Page 12 Enable/Disable deactivation by RFID tag Enable deactivation of the system by RFID 1. Enter setup mode 2. Type [3610#] 3. You hear one bleep: the setup is successful Disable deactivation of the system by RFID 1. Enter setup mode. 2. Type [3611#] 3.
  • Page 13 Changing Codes Change User Code 1. Enter setup mode 2. Type [ 38+new user code+# 3. You hear one bleep: the setup is successful Note: The user code must be 4 digits. Default user code is “1234” Change Admin Code 1.
  • Page 14 General Our products are designed to comply with the recommended codes and practice, and is to be installed and serviced by competent persons in accordance with the relevant regulations. Guidance >Smart alarm accessories are specified a maximum of 80meters line of sight in open air. For every obstacle the signal strengh is reduced.
  • Page 15 Elite Security Products Telephone : 01527 51 51 50 Redditch B98 8YN Fax: 01527 51 51 43 Email : info@espuk.com Web : www.espuk.com E&OE - Errors and omissions excepted.G21...