Simplay3 Mailbox Shield 419110 Manual

419110
Total Defense
Mailbox Shield
For assistance or replacement parts please contact Simplay3
Pour de l'assistance ou des pièces de rechange, veuillez communiquer avec Simplay3
Para recibir asistencia o conseguir piezas de repuesto, póngase en contacto con Simplay3
The Simplay3 Company
9450 Rosemont Drive
Streetsboro, OH 44241
ENGLISH
OBSERVE THE FOLLOWING STATEMENTS AND WARNINGS TO
REDUCE THE LIKELIHOOD OF SERIOUS OR FATAL INJURY.
SAVE THIS SHEET FOR FUTURE REFERENCE.
WARNING:
- Choking Hazard: Small parts. Sharp points. Adult assembly required.
- Required for Installation (choose one method from below):
- (1) Two T-post fence posts to match height of mailbox (not included)
- (2) Two Standard 4"x4" posts to match height of mailbox (not included)
- (3) Two Standard 2"x4" posts to match height of mailbox (not included)
- (4) One Standard 4"x4" post to match height of mailbox (not included)
- Wooden posts are recommended to be installed 18"-24" deep in the ground.
- Decal Application:
Clean and dry area thoroughly. Center decal in area. Apply pressure from center to
outer edge.
- To minimize risks posed by drill shavings, screws are designed to pierce the plastic
and form their own threads. Use caution not to over-tighten screws or they will not hold
parts together appropriately.
- Cleaning Instructions:
General cleaning: Use mild soapy water.
- Disposal Instructions:
Please recycle when possible. Disposal must be in compliance with all government
regulations.

CHOOSE YOUR INSTALLATION METHOD

1 |
56241911100
TM
®
| 1-866-855-0100
| www.simplay3.com
MEDIUM DUTY APPLICATION
OPTION 1
STEEL T-POSTS

RECOMMENDED TOOLS

For Metal Posts
MD
®

PARTS LIST A

A
x2

PARTS LIST B

B
x8
C
x8
3" (7,62cm)
E
OPTION 2
2"X4" POSTS
OPTION 3
4"X4" POST
For Wood Posts
3/16"
F
HEAVY DUTY APPLICATION
D
x8
OPTION 4
4"X4" POSTS
11/08/2019