Advertisement
Quick Links
Advertisement
Summary of Contents for Magic Leap PEQ Series
- Page 1 QUICK START GUIDE EARLY ACCESS PROGRAM (PEQ SERIES) R . 3.16.2022...
- Page 2 What’s in the Box Your Magic Leap 2 Early Access Program (PEQ Series) box contains: Headset ● Compute Pack ● Controller ● Enterprise Charger or Health Care Charger, as applicable - 2 x ● 45W USB-C charger and cables for Compute Pack and Controller Fit Kit for Headset.
- Page 3 Attach Your Compute Pack to a Pocket… Slide the Compute Pack onto a pocket until it moves past the clip. Please don’t put the Compute Pack in a pouch or pocket while in use or block the vents. The Compute Pack easily clips onto your pocket.
- Page 4 … Or to the Shoulder Strap Clip the carabiners on the Shoulder Strap to the corresponding fasteners on the Compute Pack. Get comfortable by adjusting the length. Fasten the carabiners on the ends of the Shoulder Strap to the Compute Pack to hold it into place.
- Page 5 Put on your Headset Gently stretch the back of your Headset headband until it comfortably fits over your head. Insert required pads and nosepiece from the included Fit Kit for an individualized comfortable fit for you. For the best comfort and visual experience, follow the steps outlined in the Fit and Eye Calibration app accessible from the Home menu.
- Page 6 Prevent Tangling the Cords Be sure to prevent the cord from getting tangled or wrapped around the headband. The Headset cord should be clear of the headband accessory and torsion band.
- Page 7 Turn On Your Early Access Program (PEQ Series) Magic Leap Press the button on the front of the Compute Pack and wait until the lights are fully illuminated. The five lights towards the top of the Compute Pack will be illuminated when fully...
- Page 8 Identifying Buttons and Controls Review the corresponding illustrations to become familiar with the buttons and controls of your new Magic Leap 2. Identify the buttons and controls on the Magic Leap 2 Controller Compute Pack pictured.
- Page 9 Set Up Your Device Your device needs to be set up before you can use it. 1. Your Controller should be paired out of the box. If not, connect the Controller to the Compute Pack using the USB-C to USB-C cable. 2.
- Page 10 Store Safely store the device in the Carry Case or box provided. Always keep it out of direct sunlight to avoid damage. For the full safety instructions, see the Magic Leap 2 – PEQ Series Safety Guide & Regulatory Information.
- Page 11 Keep up to date We may update this guide from time to time. For the latest version, please visit magicleap.com/start Need more help? Contact Customer Support by visiting our Early Access Program Customer Care page. Copyright © 2018 - 2022 Magic Leap, Inc.
Need help?
Do you have a question about the PEQ Series and is the answer not in the manual?
Questions and answers