Advertisement
Table of Contents
S
Please note these are basic keystroke details to setting up your system. For in-depth
information, please consult your manual.
Setting The Timed Heating
Press SET 5 times through password.
DT 0 appears
Press +
DT F appears
Press +
tHet appears.
Press SET
tH1o appears (Heating Period 1 On) 04:00 default
Press SET - Hours will flash adjust
on time hours using + or
Press SET - Minutes will flash Adjust
on time minutes using +or
Press SET - Temperature will flash
Adjust Temperature using +or – Press
SET
Press +
tH1F appears (Heating Period 1 Off) 05:00 default
Press SET - Hours will flash adjust
off time hours using + or –
Press SET - Minutes will flash Adjust
off time minutes using +or –
Press SET - Temperature will flash
Adjust Temperature using +or
Press SET
Press +
tH2o appears (Heating Period 2 On) 10:00 default
Use Red sub routine as above, if you need to make changes.
Press +
tH2F appears (Heating Period 2 Off) 10:00 default
Use Red sub routine as above, if you need to make changes.
S
SR868C8
UN
CAN™
Quick Setup Guide
–
–
–
Default if 3 degrees above on temp
Advertisement
Table of Contents
Summary of Contents for SUNSCAN SR868C8
- Page 1 SR868C8 CAN™ Quick Setup Guide Please note these are basic keystroke details to setting up your system. For in-depth information, please consult your manual. Setting the Timed Heating Press SET 5 times through password. DT 0 appears Press + DT F appears Press + tHet appears.
- Page 2 Press + tH3o appears (Heating Period 3 On) 17:00 default Use Red sub routine as above, if you need to make changes. Press + tH3F appears (Heating Period 3 Off) 22:00 default Use Red sub routine as above, if you need to make changes.
Need help?
Do you have a question about the SR868C8 and is the answer not in the manual?
Questions and answers