Advertisement
Quick Links
CLEANING
Frequent cleaning will prolong the life of the unit, ensure fire prevention and provide for more efficient
operation.
1. Remove the retaining cage by holding the trap securely and twisting counter clockwise.
2. Grasp the edge of the crossbar and pull up firmly to remove damper assembly.
3. Dispose of contents and clean any build up from the inside of the retaining cage with a small brush.
4. Attach the air damper assembly to retaining cage and reattach to trap with a clockwise twist to the lock
position.
IMPORTANT: DO NOT press or push against the screen windows while cleaning or assembling.
TROUBLESHOOTING
Problem:
Possible cause:
No electrical power
Bulbs do not illuminate
and fan does not spin.
Shorted fan.
Bulbs illuminate, but fan
does not spin.
Fan spins, but bulbs do
1. Bulbs not seated
properly
not illuminate.
2. Burnt out bulbs
Quality lifesciences Private Limited
G 1009, titanium city centre,100ft anand
nagar road,Satelite,Ahmedabad 380015
Correction:
1. Check plug and receptacle and fuse or circuit
breaker.
1.UNPLUG UNIT: Examine fan to see that it is free
from foreign material, dirt or build-up of dead insects.
2.Clean unit as in "CLEANING" section.
1. Check all sockets for proper bulb seating and
alignment.
2. Replace bulbs if needed following instructions
under"Replacing Bulb"
PEST TRAP
Model No.:GM928
INSTRUCTION MANUAL
PLEASE READ THIS MANUAL CAREFULLY
BEFORE USING THE APPLIANCE.
KEEP MANUAL IN A SAFE PLACE FOR EASY
REFERENCE
Advertisement
Related Manuals for Moskitrap GM928
Summary of Contents for Moskitrap GM928
- Page 1 3. Dispose of contents and clean any build up from the inside of the retaining cage with a small brush. 4. Attach the air damper assembly to retaining cage and reattach to trap with a clockwise twist to the lock position. Model No.:GM928 IMPORTANT: DO NOT press or push against the screen windows while cleaning or assembling. INSTRUCTION MANUAL...
- Page 2 WARNING INSTALLATION when using electric appliances,basic precautions should always be followed,including the following: 1. Unpack unit. Save carton for off-season storage (if needed). 1.To disconnect,turn all controls to the off(“O”)position,then remove plug from outlet. AIR DAMPER ASSEMBLY Remove cardboard insert from the retaining cage. 2.Unplug from outlet when not in use an before servicing or cleaning.
Need help?
Do you have a question about the GM928 and is the answer not in the manual?
Questions and answers