Download Print this page

Patioflare PF-CH200-CR Assembly Instructions

Chair

Advertisement

Available languages

Available languages

Quick Links

IMPORTANT TIP: PLEASE CHECK INSIDE THE BOX TO ENSURE ALL PARTS ARE INCLUDED BEFORE STARTING ASSEMBLY.
Prior to assembly, please read these instructions carefully. Please carry out assembly on a soft surface to avoid scratching the surface.
Washers ¼" (11)
ASSEMBLY INSTRUCTIONS:
1.
Assemble the back (part 1) to the seat (part 2), do not tighten the screw too much in this step.
2.
Assemble the back (part 3) to the arm (part 4), do not tighten the screw too much in this step.
3.
Assemble the arm (part 5) to the seat (part 6), tighten all the screws tightly in this step.
(CAUTION!) Do Not Over-tighten!
Only return this product to the store if it was purchased within 90 days. If you
have problems after 90 days of purchase, please email our customer service
department for any questions or concerns at customercare@jrhome.com or please call
CHAIR | PF-CH200 -CR
ASSEMBLY INSTRUCTIONS
Hexagon Screws
¼" x 1¼" (3)
Hexagon Screws
¼" x 5/8" (4)
IMPORTANT
1-800-561-5550.
PARTS LIST
Seat
Arms
Back
HARDWARE LIST
¼" Washers
¼"x 5/8" hexagon screws
¼" x 1¼" hexagon screws
Hexagon screws
¼" x 1¼" (2)
1
2
1
11
4
5

Advertisement

loading
Need help?

Need help?

Do you have a question about the PF-CH200-CR and is the answer not in the manual?

Questions and answers

Summary of Contents for Patioflare PF-CH200-CR

  • Page 1 CHAIR | PF-CH200 -CR ASSEMBLY INSTRUCTIONS IMPORTANT TIP: PLEASE CHECK INSIDE THE BOX TO ENSURE ALL PARTS ARE INCLUDED BEFORE STARTING ASSEMBLY. Prior to assembly, please read these instructions carefully. Please carry out assembly on a soft surface to avoid scratching the surface. PARTS LIST Seat Arms...
  • Page 2 CHAISE | PF-CH200-CR MODE D’EMPLOI POUR L’ASSEMBLAGAGE CONSEIL IMPORTANT : VEUILLEZ VÉRIFIER À L’INTÉRIEUR DE LA BOÎTE SI TOUTES LES PIÈCES SONT PRÉSENTES AVANT DE COMMENCER LE MONTAGE. Avant de commencer le montage, veuillez lire attentivement toutes les directives. Veuillez effectuer le montage sur une surface unie pour éviter d’érafler les surfaces.