Table of Contents
Advertisement
Quick Links
The K & Design® is a
registered trademark of
LF, LLC. All Rights Reserved.
*Meets or Exceeds ANSI/ASME PALD-2005 Parts 4 – Vehicle Support Stands
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-3KOBALT, 8 a.m.- 8 p.m., EST, Monday-Friday.
JACK STANDS WITH LASER
Purchase Date
1
3 TON (6,000 LBS.)
ITEM #0004118
MODEL #85009
Français p. 9
Español p. 17
Advertisement
Table of Contents
Related Manuals for LF Kobalt 85009
Summary of Contents for LF Kobalt 85009
- Page 1 JACK STANDS WITH LASER The K & Design® is a MODEL #85009 registered trademark of LF, LLC. All Rights Reserved. Français p. 9 Español p. 17 *Meets or Exceeds ANSI/ASME PALD-2005 Parts 4 – Vehicle Support Stands ATTACH YOUR RECEIPT HERE...
- Page 2 TABLE OF CONTENTS Safety Information ..........................2 Package Contents ..........................3 Preparation Before Use ........................4 Assembly Instructions ........................4 Operation Instructions ........................5 Care and Maintenance ........................7 Warranty ............................. 8 Replacement Parts ..........................8 SAFETY INFORMATION Before using this product, read this manual and follow all Safety Rules and Operational Instructions. Owner and/or Operator Responsibility The owner and/or operator shall read and comprehend all instructions and warning labels for product and retain them for future reference.
- Page 3 ALWAYS apply ALWAYS place chocks parking brake firmly. at front and rear of the vehicle's wheel that will NOT be lifted. ALWAYS use jack stands ALWAYS support the weight of as supporting devices. the load being lifted with jack Lifting operations must stands rated at the proper ALWAYS be done using a capacity prior to beginning any...
- Page 4 PREPARATION BEFORE USE Before using this product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to use the product. Contact customer service. IMPORTANT: ALWAYS Inspect the jack stands before each use. Do not use if bent, broken or cracked components are noted.
- Page 5 OPERATION INSTRUCTIONS To Position Jack Stands: 1. Place vehicle in PARK (vehicles with automatic transmissions) or in GEAR (vehicles equipped with standard transmissions) and apply emergency brake. Load locking 2. Place chocks at front and rear of the vehicle's and release knob wheel that will NOT be lifted.
- Page 6 OPERATION INSTRUCTIONS (continued) Laser Targeting Device This jack stand has been fitted with a laser targeting device. This device is designed to assist the operator to properly position the saddle of the jack stand under the load point on the undercarriage of the vehicle being lifted.
- Page 7 OPERATION INSTRUCTIONS (continued) REMOVE/INSTALL BATTERIES IN LASER MODULE (Use LR41 Button Battery, 3ea.) 1. Remove the rubber retainer cap (A) by pulling upward. 2. Remove the laser module (B) from the saddle. 3. While holding body of laser module (B), twist and pull the end cap assembly (C) and remove the old batteries from inside the body.
- Page 8 WARRANTY 1-Year Hassle-Free Guarantee. You should never have a problem with your Kobalt tools. However, if you do, return the item to the place of purchase for a free replacement. No questions asked. For more information, call 1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday. REPLACEMENT PARTS LIST For replacement parts, please call customer service at 1-888-3KOBALT, 8 a.m.- 8 p.m., EST, Monday-Friday.
Need help?
Do you have a question about the Kobalt 85009 and is the answer not in the manual?
Questions and answers