Advertisement
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Toguard AP40
- Page 1 此⻚不印刷 size：190x135mm 封⾯200g铜版纸 ，内⻚书纸 装订⽅式：骑⻢钉...
- Page 2 AP40 Wireless outdoor solar security camera User Manual...
-
Page 4: Table Of Contents
Table of Contents Part 1: Before Installation-------------------------------1-4 Part 2: In-App Setup-----------------------------------5-10 Part 3: Physical Installation----------------------------11-14 Part 4: Detailed App Instructions---------------------15-22 Part 5: How to save and delete video--------------------23 Part 6: FQAs---------------------------------------------24 V20200808... -
Page 6: Part 1: Before Installation
BeforeInstallation Warm tips before you go: 1. This camera can only be set up with 2.4g Wi-Fi network. (It's ok to use Cell phone 4G data to live viewing it after the camera was set up with 2.4g Wi-Fi network firstly.) 2. - Page 7 BeforeInstallation Product Diagram Solar Panel Lens Photosensitive White light LED Indicator Infrared LED Power Reset SD Card...
- Page 8 BeforeInstallation Charging Connect the camera to the solar panel and then Please charge the camera about 6-8 hours by pluqqing the solar panel into a power source using an USB cable. A red led will stay on the solar panel. Insert SD card Please format the SD card to FAT32 format (Application to Windows system ONLY), then install the micro-SD card when the...
- Page 9 BeforeInstallation Charge Content AP40 Wireless outdoor solar security camera User Manual...
-
Page 10: Part 2: In-App Setup
In-AppSetup Make sure the distance between your phone,router and the camera is no more than 1.5 feet when you're ready to pair the camera.Ensure that the Wi-fi signal strength on your phone is good. 1. Download the App (works only with ios & Android devices) Please locate the"Ubox"... - Page 11 In-AppSetup 3. Set up the installed location Input the installed location Click"Add family" and then input the name of house, click ""next step" and then input required information, and thel click "finished" to save it. 4. Pairing the camera with the App Turn on the camera: switch the power button to up to turn on the camera, Then you will hear the following voice "...
- Page 12 In-AppSetup Please connect your phone to the 2.4Ghz wifi firstly before you pair the camera, make sure your router password in mind before you start the pairing process. 1) Click "Add a device" and then choose "Setup device" click "Yes", when you hear the following voice " The camera is now ready to begin pairing".
- Page 13 In-AppSetup Method 1: QR code configuration 1.1 Click the "QR code configuration", hold the QR code in front of the S600 camera, and then you will hear the following "Pairing Information voice Received". Method 2: Sound wave configuration 2.1 Enter into the "search device" page, make sure to turn up you phone's volume to the Maximum, you will hear the following voice: "Pairing Information Received".
- Page 14 In-AppSetup 3) You have connected the device to the App successfully.Choose a name of the devices from the drop-down choice, or you can modify one that you want. and then select the area where device is located.(you have to choose one or you cannot connect the camera to the app) 4) Congratulations! Now you can live view the camera on your phone anytime and anywhere.If you're unable to pair the camera,...
- Page 15 In-AppSetup This icon indicate that the push mode is on, click it to turn off push mode and then you cannot receive any notifications. The video clips will save in the Cloud. Cloud video length is 8 seconds defaulted and free for 30 days. And you have to pay for the service per month or other cloud service.
-
Page 16: Part 3: Physical Installation
PhysicalInstallation Check your camera signal strength. If not satisfied with video smoothness and signal strength in App is not strong, we would suggest adding wifi extender between the Router and the camera. Recommended height to install the camera We suqgest installing the camera about 8ft.You may adjust the camera angle physically according to the live view in your mobile. - Page 17 PhysicalInstallation Adjust the bracket on the wall and then mark 3 holes for mounting. Fix the bracket to the wall by expansion screws.
- Page 18 Image Quality Resolution 1080P Specifications Lens angle FOV 160° Lens Video format H.264 Video Frames per 15fps Specifications second 8GB-Max 64GB SD card support Built-in speaker Output Audio Built-in microphone Intput Communications 2.4GHz WiFi Battery capacity 4000mAh Standby time Max 6 months Battery Power 2W(run)/0.012W...
- Page 19 TechnicalSpecifications System Android 2.3 above/ iOS 7.0 above Suppport PIR angle 110° PIR angle 16ft Range Up to 32ft Night Vision...
-
Page 20: Part 4: Detailed App Instructions
DetailedAppInstructions 1.click,you could live viewing videos. - Page 21 Wifisignalstrength and then re install it to the camera body.Or Tips: Please make sure your contact Toguard support team for a replacement camera has a full bar of wifi at support@toguard.cc All friendly customer strength to ensure a smooth live service staffs are ready to assist you.
- Page 22 DetailedAppInstructions Setting:Clicktointerintodevice settings.(Checkpage19formore details) Two-way Talk: Click to speak to visitors and hear what they say. Manual Recording: Click to manually record and the videos will be saved to your phone's Album. Cloud storage: Click to playback videos saved in cloud storage. Screenshot: Click to screen capture and pictures will be saved to your phone's...
- Page 23 DetailedAppInstructions SDCardSetting 1) Please turn on the cloud storage so that you can sync the camera time with your phone.2) Please format the micro sd card before you installed it.The cameria doesn't support plug and play. So please make sure to power off the camera and then install your card.
- Page 24 DetailedAppInstructions Scenemode You can choose to set it as Normal, back light compensation, night IR, High light compensation or Dynamic according to your actual light environment of installation place. PIRDetection You can set the PIR sensitivity as Disabled, Low, Medium and High. 1) When you set the PIR as Disabled,you will not record and receive any motion triggered events.
- Page 25 DetailedAppInstructions Activetime 1) This is the time you could set for the video length recorded to micro sd card. 2) Always: If you choose this option,you will not allow the camera enter into standby mode,the camera will keep recording all the time until battery drains out.
- Page 26 DetailedAppInstructions LEDindicator When you choose Enable,the Blue LED will light up to indicate when you operate the camera as it should be.When you choose Disabled,the Blue LED will not light up to indicate the operations or trigger motions.lt is recommended to set it as the default Powerfrequency Please choose 60 or 50HZ according to your local frequency, It's defaulted to 60HZ for united states users.
- Page 27 DetailedAppInstructions DeviceName You can set a desired name for your camera.
-
Page 28: Part 5: How To Save And Delete Video
Howtosaveanddeletevideos 1.VideoscanbesavedinCloudStorage: 1). The videos of PIR activity. You could save the videos of PIR activities in cloud storage, which can be used 30 days for free and then you have to pay for the services. and playback in the app. 2.VideoscanbesavedintheSDcard: (1). -
Page 29: Part 6: Fqas
not,we would suggest adding wifi extender in between. Q3:WhyIcannotreceiveanyalarmafterIfinished connectingthecamerawiththeApp? A:1. Click the in App to confirm you have turned on the push mode. 2. Check your mobile settings to allow the notification. If you have any other question,please feel free to contact us at support@toguard.cc...
Need help?
Do you have a question about the AP40 and is the answer not in the manual?
Questions and answers
the W204 system is chirping and making noises
@Elvis Dzikowski