Download Print this page

Jescraft SWC-6144 Operational Safety And Assembly Instructions

Stackable warehouse cart

Advertisement

Quick Links

Models: ATC-5834PL-2R2S; *Base ATC cart with optional Jescraft Casters
Picture may differ from
actual product
READ THESE INSRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
STACKABLE WAREHOUSE CART
Models: SWC-6144
READ THESE INSRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
READ BEFORE BEGINNING ASSEMBLY AND USE
FAILURE TO READ, UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS IN THIS
MANUAL BEFORE ASSEMBLING, INSTALLING, USING OR SERVICING OF THE PRODUCT IS A MISUSE OF THE
PRODUCT AND COULD RESULT IN SERIOUS INJURY OR DEATH. IF AFTER READING THE MANUAL YOU DO
NOT UNDERSTAND AN INSTRUCTION, ASK YOUR SUPERVISOR OR EMPLOYER FOR CLARIFICATION.
JESCRAFT IS NOT LIABLE FOR ANY INJURY OR PROPERTY DAMAGE THAT OCCURS AS A CONSEQUENCE OF
FAILING TO APPLY EITHER: a) THE INSTRUCTIONS IN THIS MANUAL; OR b) INFORMATION PROVIDED ON
LABELS AFFIXED TO THIS PRODUCT. NEITHER IS JESCRAFT RESPONSIBLE FOR ANY CONSEQUENTIAL
DAMAGES OR INJURYS SUSTAINED AS A RESULT OF FAILING TO EXERCISE SOUND JUDGMENT WHILE
ASSEMBLING, INSTALLING, USING OR MAINTAINING THIS PRODUCT.
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
This Cart is designed to support a maximum load of 3,000 lbs. DO NOT exceed this maximum rated load.
OPERATION AND SAFETY
• Do not use this equipment if you are in poor health, taking medications,
drugs, or have been consuming alcohol, all of which may impair your
ability to work safely on this product.
• Always use this cart in compliance with local or national laws,
regulations, codes, and any other standards enforced in the location
where the product is used. This is the responsibility of the owner/user.
• Inspect product before each use. Do not use if damaged or if any
unusual noise or movement is observed. Check for missing parts.
• Examine thoroughly to make sure Cart is set up properly. If assembling
or tightening fasteners, tighten all fasteners to the torque
specified: Recommended Tightening Torque: 21 ft-lbs. Do not exceed
27 ft-lbs. Do not overtighten – overtightening can cause damage to the
unit. Do not replace or substitute bolts, nuts, or other hardware that is
of lesser quality than the hardware supplied by the manufacturer.
• All components must be complete, functioning properly and correctly
assembled. If a malfunction occurs, remove the product from service
and notify your supervisor and maintenance personnel about the issue.
• Any incomplete part, missing part, or ill-fitting part should be replaced
prior to use.
• Keep the product clean & dry. Lubricate moving parts. Proper use,
maintenance, and storage are essential for this product to function
properly.
• Use the right product for the job. Do not modify the Cart and do
not use the Cart for a purpose for which it was not intended.
• Do not exceed the maximum load capacity of 3,000 lbs.
ALWAYS
INSPECT
BEFORE
USE
OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS
• Always distribute objects on the Cart evenly and resting adequately on
the bottom tubing platform. Uneven weight distribution could cause
Cart tipping.
• Be aware of dynamic loading. Suddenly dropping or bouncing a load on
the Cart may create, for a brief instant, an excess load, which may result
in damage to the product and/or personal injury.
• This Cart must be used on solid flat surfaces.
• This Cart must be used on a firm surface that is free of pits, debris, holes
or obstructions.
• Acids are corrosive and can seriously affect strength. Do not expose this
Cart to corrosive substances.
• Never move a Cart with a worker within.
• Do not use powered devices to propel this Cart. Use extra caution near
operating machinery.
• Do not modify this Cart or any of its components.
• Do not remove any labels from this Cart.
• Always use this product in accordance with the instructions in this manual
and consistent with any training relevant to machines, devices, materials,
etc. used in conjunction with this product.
• This cart shall only be stacked when empty of contents and with
removeable uprights stored securely in center of cart frame.
CART MAXIMUM LOAD
CAPACITY: 3,000 lbs.
METAL CONDUCTS
ELECTRICITY
985-0007 Rev 0

Advertisement

loading

Summary of Contents for Jescraft SWC-6144

  • Page 1 NOT UNDERSTAND AN INSTRUCTION, ASK YOUR SUPERVISOR OR EMPLOYER FOR CLARIFICATION. JESCRAFT IS NOT LIABLE FOR ANY INJURY OR PROPERTY DAMAGE THAT OCCURS AS A CONSEQUENCE OF FAILING TO APPLY EITHER: a) THE INSTRUCTIONS IN THIS MANUAL; OR b) INFORMATION PROVIDED ON LABELS AFFIXED TO THIS PRODUCT.
  • Page 2 985-0007 Rev 0 OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS ACIDS ARE CORROSIVE. MUST BE USED ON A FIRM UNEVEN WEIGHT DO NOT EXPOSE UNIT SURFACE THAT IS FREE OF DISTRIBUTION COULD TO CORROSIVE PITS, DEBRIS, HOLES OR CAUSE CART TIPPING SUBSTANCES OBSTRUCTIONS SUDDENLY DROPPING OR UNIT SHALL ONLY BE...