Advertisement
Quick Links
Precautions for use
Please read this manual carefully before installing
this product.
Please use within the scope of product attributes.
This product is not child friendly. Do not allow
children to play with parts.
Executive standard
Q/ZFQT 01-2014 QB/T2182-95
Applicable Scope
Applicable models
Schrader/ presta value bicycles and electric bicycles.
Using the Scene
Cycling, basketball, balloon products cheer
Accessories
Ball type air needle; balloon type air needle;
fixed frame
Specification
Product Name
HIMO Mini Inflator
Dimension
270 x 52 x 29 mm
Product Weight
150 g
Rated capacity
39 ml
Rated air pressure
6 Bar
Cylinder body material
Aluminum alloy
Valve type
Schrader / Presta Value
1. Valve
2. Lock 3. Storage of Valve 4. Handle
Installation
Valve installation (Ball and inflatable toys)
Take out the gas needle.
Install the gas needle.
After installing the air
Insert the air needle into
needle, open the lock.
the air hole to pump air.
Use steps
Align the valve and insert
Open the handle
and lock the lock
Hold the handle tightly
After pumping up, put
and pull to pump up
away the handle and
restore the lock
Storage environment
1. Store it in a cool place and avoid exposure to sunlight.
2. Avoid high temperatures, such as heating sources,
to avoid excessive aging of rubber parts.
3. It should be stored upright, and no heavy objects can
be squeezed to avoid deformation of the barrel.
4. Avoid all kinds of stains. If it is stained during use,
please wash it with soap immediately, not alcohol.
Maintenance
It is recommended that in order to avoid overheating of
the piston when pumping the air cylinder, it is necessary to
make necessary intervals, so as to extend the life of the
piston.
Advertisement
