Subscribe to Our Youtube Channel
Summary of Contents for Satel BT-RS232
- Page 1 SATEL BT-RS232 Adapter User Guide SATEL Oy Meriniitynkatu 17, FI-24100 Salo, Finland Tel. +358 2 777 7800 www.satel.com info@satel.com...
-
Page 2: Important Notice
User Guide, Version 1.0 IMPORTANT NOTICE All rights to this manual are owned solely by SATEL Oy (referred to in this user guide as SATEL). All rights reserved. The copying of this manual (without the written permission from the owner) by... -
Page 3: Restrictions On Use
SATEL BT-RS232 User Guide, Version 1.0 RESTRICTIONS ON USE This product complies with relevant international standards. Product is currently type approved for EU, USA and Canada. On these countries there are no restrictions for its use. Using this product in other countries is prohibited. -
Page 4: Warranty And Safety Instructions
-The product must be operated at frequencies allocated by local authorities, and without exceeding the given maximum allowed output power ratings. SATEL and its distributors are not responsible, if any products manufactured by it are used in unlawful ways. -
Page 5: Table Of Contents
RESTRICTIONS ON USE ..................3 WARRANTY AND SAFETY INSTRUCTIONS ............4 TABLE OF CONTENTS ..................5 INTRODUCTION ....................6 1 SATEL BT-RS232 ADAPTER TECHNICAL SPECIFICATIONS ......7 2 SATEL BT-RS232 SETUP GUIDE ..............8 3 SATEL BT-RS232 MECHANICAL SPECIFICATIONS ........10... -
Page 6: Introduction
SATEL BT-RS232 offers a compact and easily integrable solution for devices that needs to communicate without a cable connections. SATEL BT-RS232 adapter is a versatile Bluetooth RS-232 serial adapter that provides a compact and flexible solution for many different wireless applications. -
Page 7: Satel Bt-Rs232 Adapter Technical Specifications
SATEL BT-RS232 User Guide, Version 1.0 1 SATEL BT-RS232 ADAPTER TECHNICAL SPECIFICATIONS Available model and product code: YI0232 - SATEL BT-RS232 GENERAL Operating voltage +9 ... +27.5 Vdc Device supply input chaining to sensor supply output may restrict voltage range i.e. sensor smaller +12...+30 Vdc range shall be considered. -
Page 8: Satel Bt-Rs232 Setup Guide
SATEL BT-RS232 User Guide, Version 1.0 2 SATEL BT-RS232 SETUP GUIDE 1) Cable Connections Before connector assembly, pull cables thru the (PG9) cable glands. Pull power cable wires separate for approx. 10 cm length and pull each wire end separately thru its own hole on gable gland sealing with two small holes in it. - Page 9 This bluetooth on device is in slave mode and pairing is activated automatically when power is connected in to device (pairing is possible only while blue led is blinking). User does not need any additionally software to connect SATEL BT-RS232 device Device Bluetooth name: SATEL BM10...
-
Page 10: Satel Bt-Rs232 Mechanical Specifications
SATEL BT-RS232 User Guide, Version 1.0 3 SATEL BT-RS232 MECHANICAL SPECIFICATIONS Product mechanical dimensions :...
Need help?
Do you have a question about the BT-RS232 and is the answer not in the manual?
Questions and answers