Hitachi Zaxis 200 Workshop Manual page 29

Check Key Switch:
•
If a fire breaks out, failure to stop the engine will
escalate the fire, hampering fire fighting.
•
Always check
operating the machine every day:
1) Start the engine and run it at slow idle.
2) Turn the key switch to the OFF position to
confirm that the engine stops.
•
If any abnormalities are found, be sure to repair
them before operating the machine.
Check Emergency Engine Stop Switch:
•
If a fire breaks out, failure to release pressurized air
inside the hydraulic tank will escalate fire, hamper-
ing fire fighting.
•
Check the emergency engine stop switch func-
tion every 250 hours:
1) Start the engine and run it at slow Idle.
2) Turn the emergency engine stop switch to the
EMERG. STOP position.
3) Confirm that both engines stop and that
pressurized air inside the hydraulic oil tank is
released (a hissing sound should be heard).
•
If any abnormalities are found, be sure to repair
them before operating the machine.
Check Heat Shields:
•
Damaged or missing heat shields may lead to fires.
•
Damaged or missing heat shields must be
repaired or replaced before operating the
machine.
key switch function
SAFETY
before
S508-E02B-0019
SA-25