Advertisement
Patents Pending
Installation Manual
Revision B: 15 December 2015
P/N: 100026
WARNING: SERIOUS INJURY MAY RESULT IF THIS PRODUCT IS
MISUSED OR NOT INSTALLED PROPERLY. BLUEWATER MFG., INC.
PROVIDES THESE INSTRUCTIONS AND RELIES UPON THE
PURCHASER AND END USER TO TRAIN ALL PERSONNEL TO ENSURE
THE USERS OF THIS PRODUCT FULLY UNDERSTAND THE
IMPORTANCE OF FOLLOWING THESE INSTRUCTIONS.
BLUEWATER MFG. EXPRESSLY DISCLAIMS ANY LIABILITY FROM
INJURY, DAMAGE, OR OTHER LOSS RESULTING FROM THE IMPROPER
OR UNAUTHORIZED INSTALLATION OR USE OF SAFETYRAIL 2000.
4064 Peavey Rd
Chaska, MN 55318
Phone: 952-448-2935
Toll Free: 866-933-2935
Fax: 952-448-3685
Email: info@bluewater-mfg.com
On the Web: www.bluewater-mfg.com
0
Advertisement
Table of Contents
Summary of Contents for BluWater Technology SAFETYRAIL2000
- Page 1 Patents Pending Installation Manual Revision B: 15 December 2015 P/N: 100026 WARNING: SERIOUS INJURY MAY RESULT IF THIS PRODUCT IS MISUSED OR NOT INSTALLED PROPERLY. BLUEWATER MFG., INC. PROVIDES THESE INSTRUCTIONS AND RELIES UPON THE PURCHASER AND END USER TO TRAIN ALL PERSONNEL TO ENSURE THE USERS OF THIS PRODUCT FULLY UNDERSTAND THE IMPORTANCE OF FOLLOWING THESE INSTRUCTIONS.
- Page 2 Installation Manual - Table of Contents Description: Page No. Safety Precautions SafetyRail 2000 Assembly Instructions Returns ParaRail Installation...
- Page 3 SAFETY PRECAUTIONS: Personnel using this product must be trained on proper and safe installation. The load limit of the installation surface must be checked to ensure that the surface can tolerate the weight of the SafetyRail 2000 and installation personnel. SafetyRail 2000 is designed to be used only on flat surfaces, free of debris.
- Page 4 SafetyRail 2000 INSTALLATION INSTRUCTIONS These instructions must be followed in order to comply with the Occupational Safety and Health Administration’s regulations: (Standards-29 CFR) 1910.23 (e) and 1926.502 (b). 1) Space the bases to the appropriate width and insert the rail into the desired receiving posts on the bases.
- Page 5 PARARAIL INSTALLATION These instructions must be followed in order to comply with the Occupational Safety and Health Administration’s regulations: (Standards-29 CFR) 1910.23 (e) and 1926.502 (b). Important: In order to prevent serious injury, these set-up procedures must be followed. 1) Measure the cantilevered distance (M1). 2) Measure the distance from centers of the ParaRail legs (M2).
Need help?
Do you have a question about the SAFETYRAIL2000 and is the answer not in the manual?
Questions and answers