Code Blink Out; Quick Code Reference - Crosley KAMELEON Manual

(To find out which code is currently programmed)
If you have set up your KAMELEON 6 via the Search Method, you can blink
back your code for future reference. Please note that the animated IR Indicator
will indicate the 4 digits by animated blinks.
Example: To blink out your television code:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
- To blink back the code for your other devices follow the instructions above,
only press the appropriate device key during step 4.
Write down the codes for your devices in the boxes below for quick and
easy reference.
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
12

Code blink out

Press and hold down the MAGIC key (for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
Press OTHER.
Press 9 9 0, the animated IR Indicator
will light up twice.
Press and release the TV key to select the device type you like
check the code for.
For the first digit of your four-digit code,
press 1 and count the blinks of the animated
IR Indicator. If there are no blinks,
the digit is "0".
For the second digit, press 2 and count
the animated blinks. If there are no blinks,
the digit is "0".
For the third digit, press 3 and count
the animated blinks. If there are no blinks,
the digit is "0".
For the fourth digit, press 4 and count
the animated blinks. If there are no blinks,
the digit is "0". Now you have found your
four-digit code.
Press ESC to return to the setup screen OR press a device key
if you want to perform the blink out for another device.
Press ESC again to return to user mode.

Quick code Reference

■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
WWW.ONEFORALL.COM