Download Print this page

Sensaphonics ASI AUDIO 3DME Manual

Custom tour iem system

Hide thumbs Also See for ASI AUDIO 3DME:

3DME Custom Tour IEM System

Thank you for choosing the 3DME Custom

Tour IEM System. This Active Ambient™ in-

ear monitor system is functionally identical

to the 3DME Music Enhancement system by

ASI Audio, with the addition of 3D custom-fit

soft silicone in-ear monitors (IEMs) from

Sensaphonics.

This addendum to the 3DME Owner's

Manual addresses only the 3D Custom

Tour earphones. Please refer to the 3DME

Owner's Manual for full instructions on

system set-up and use. The manual is

available for download at both

www.ASIaudio.com

and

www.Sensaphonics.com.

Table of Contents

Need help?

Do you have a question about the ASI AUDIO 3DME and is the answer not in the manual?

Page 1 3DME Music Enhancement system by ASI Audio, with the addition of 3D custom-fit soft silicone in-ear monitors (IEMs) from Sensaphonics. This addendum to the 3DME Owner’s Manual addresses only the 3D Custom Tour earphones. Please refer to the 3DME Owner’s Manual for full instructions on...
Page 2 Note: The earpiece cables are designed to run up, over, and behind the ears, joining behind the head and running down the back. Please refer to the 3DME Owner’s Manual for details on connecting to the bodypack. For a video on proper IEM insertion, visit YouTube/Sensaphonics: https://www. youtube.com/watch?v=rDC3lKJ4FcQ...
Page 3 Once the earpiece is fully inserted, (4) tuck the upper (helix) portion of the earpiece under the fold of your upper ear and into the (5) lower notch. Don’t be afraid to push it all the way in! Then, (6) firmly bend the cable behind your ear, shaping its internal memory wire to follows the contour of your ears.
Page 4 If you are unsure whether your earpieces are properly fitted, use the Sensaphonics Audio Seal Test, available on the 3DME bodypack, to check. For full details, see the Owner’s Manual. Technical Specifications...