Craig CMP621F Owner's Manual page 15

Brightness
System setting Default
Setting
Touch
calibration
Language
System
Information
Auto power off
Tap the ▼ or ▲icon on the screen to set the brightness level to
1 – 5 then tap the selected icon to confirm. Tap the (
the setting and exit or tap the (
·Tap Yes on the screen to reset all settings to default settings.
Tap the ( ) icon to exit or tap the (
previously menu.
·Tap No on the screen to exit without any changes.
Tap the red crosses (Total 5) on the screen then tap the (
the setting and exit or tap the (
Tap the selected language on the screen twice then tap the
( ) icon to save the setting and exit or tap the (
previously menu.
return to
Read the information of the software. Tap the (
exit or tap the ( ) icon return to previously menu.
· Tap the ▼ or ▲icon on the screen to set the timer to 3 – 20
Minutes or No auto Power off then tap the selected icon to confirm.
· Tap the ( ) icon to save the setting and exit or tap the
( ) icon return to previously menu.
Note: When the timer was set, the unit will shut off
automatically if the idle time is expired.
14
) icon to save
) icon return to previously menu.
) icon return to
) icon to save
) icon return to previously menu.
) icon to
) icon