Hotel Mode - Panasonic TC-32A400U Service Manual

5.2.

Hotel mode

1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu
In order to display the Hotel mode setup menu:
While pressing [VOLUME (-)] button of the main unit,
press [INPUT] button of the remote control three times
within 2 seconds.
Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode setup menu
Switch off the power with the [POWER] button on the
main unit or the [POWER] button on the remote control.
4. Explain the Hotel mode setup menu
Item
Mode Select hotel mode off/on
Input Select input signal modes.
Set the input, when each time power is
switched on.
Selection:
---, ANT/Cable in, HDMI1, HDMI2,
Comp./Video
• OFF: give priority to a last memory.
Channel Select channel when input signal is ANT/
Cable in.
Set the channel, each time power is switched
on.
Selection:
Any channel number or [-].
[-] means the channel when turns off.
Volume Adjust the volume when each time power is
switched on.
Range:
0 to 100
Vol. Max Adjust maximum volume.
Range:
0 to 100
OSD Ctrl Restrict the OSD.
Selection:
Off/Pattern1
• Off: No restriction
• Pattern1: restriction
Function
9
Item
FP Ctrl Select front key conditions.
Selection:
Off/Pattern1/All
• Off: altogether valid.
• Pattern1: only input key is valid.
• All: altogether invalid.
Pow Ctrl Select POWER-ON/OFF condition when AC
power cord is disconnected and then
connected.
Off: The same condition when AC power
cord is disconnected.
On: Forced power ON condition.
Copy TV to USB To Copy the hotel mode settings from TV to
USB Memory.
Please follow the next steps:
1.- Insert USB Memory.
2.- Press cursor right " " or "OK" button on
the remote control.
(A file will be created to store the hotel mode
setting and channel scan data in the USB
Memory).
Indication: [ > ]
3.- Once completed, switch "OFF" the unit.
4.- Pull out the USB from unit.
Copy USB to TV To copy the hotel mode settings from USB to
TV.
Please follow the next steps:
1.- Insert USB Memory with data copied from
TV.
2.- Press cursor right " " or "OK" button on
the remote control.
(A file will be stored to TV).
Indication: [>]
3.- Once completed, switch "OFF" the unit.
4.- Pull out the USB from unit.
When installing a number of units in a hotel or any facility, the
data in the master TV can be copied to a USB Memory and
then copy this data to the other TVs.
Function
[ In progress ]
[ Completed, pls power off ]
[In progress]
[ Completed, pls power off ]