Hardware - Neuton Garden Cart Safety And Operating Instructions Manual

Hardware

All hardware comes in colored bags: blue, green, clear, and red. You need each bag for a different step
when assembling your Cart. Only open the bags when you need to use them. Below are drawings of the
hardware (not drawn to scale) together with their quantities, and the steps where you use them.
Following that is a table that describes the contents of each bag.
1/4" x 1-3/4" (4 each)
Step 6
1/4" Lock Washer (8 each)
Steps 3 and 4
Contents of Colored Hardware Bags
Bag Color
Blue
Green
Clear
Red
All of the screws you need to assemble the NEUTON Garden Cart have a diameter of 1/4"; only the
lengths vary. This is good to know if somehow the screws get jumbled while you are assembling your
Cart. If this happens, simply get out a ruler and measure the length of the screw and you'll know what
size you are working with.
1/4" x 1-1/2" (6 each)
Steps 3 and 5
1/4" Small Flat Washer (14 each)
Steps 3, 5 and 6
Tie Wrap (3 each)
Step Description
2 Attach the buckets
3 Attach the drive train
4 Attach the caster wheel
5 Attach the upper handle
6 Attach the controls caddy
8 Secure the wire harness
1/4" x 1" (4 each)
Step 4
1/4" Large Flat Washer (4 each)
Step 4
Step 8
Hardware
1/4" x 1/2" Screw
1/4" Lock Washer
1/4" Small Flat Washer
1/4" x 1-1/2" Screw
1/4" Lock Washer
1/4" Large Flat Washer
1/4" x 1" Screw
1/4" Small Flat Washer
1/4" x 1-1/2" Screw
1/4" Nylon Lock Nut
1/4" Small Flat Washer
1/4" x 1-3/4" Screw
1/4" Nylon Lock Nut
Tie Wraps
CALL TOLL FREE 1-866-NEUTON1
1/4" x 1/2" (6 each)
Step 2
1/4" Nylon Lock Nut (6 each)
Steps 5 and 6
Quantity
6
4
4
4
4
4
4
2
2
2
4
4
4
3
11