U-Line H-8381 Manual page 2

3. Slide mounting bracket (A) onto tabletop edge. Use
three M6 screws (D or E) to secure. Tighten screws
under tabletop with 3 mm Allen wrench. Repeat for
remaining brackets. (See Figure 3)
Figure 3
D/E
PAGE 2 OF 6
ASSEMBLY CONTINUED
1-800-295-5510
uline.com
NOTE: For 1" tabletops, use M6 x 8 mm
screws (D). For 3/4" tabletops, use M6 x 15 mm
screws (E).
NOTE: To avoid damage to tabletop, do not
overtighten screws.
0721 IH-8381