Advertisement
3
• Align the tabs at the bottom of the
ball chute with the grooves in the
opening of the motor.
• Turn the ball chute clockwise to lock
it into position. Pull up on the ball
chute to be sure it is secure.
4
• At an angle, insert the closed peg on
the motor into the hole in the base.
PRINTED IN CHINA
Assembly
Ball Chute
Motor
Closed
Peg
Base Hole
©2011 Mattel. All Rights Reserved.
Groove
5
• Lower the motor so that the open
peg fits into the groove in the base.
• I nsert the battery plug into the socket
in the motor, as shown.
Hint: If there isn't a socket inside the
peg, you positioned the motor/chute
assembly backwards in the base.
Remove the motor/chute assembly and
turn it around. Repeat assembly step 4.
6
• Fit the cover over the peg and plug
and into the base.
• Insert two screws into the cover
and tighten.
4
Socket
Plug
Cover
Peg
Plug
Y0895pr-0920
Advertisement
