Related Manuals for Vents NKP 125 A21 V.2
Summary of Contents for Vents NKP 125 A21 V.2
- Page 1 USER'S MANUAL NKP 125 A21 V.2 NKD 125 A21 V.2 NKP 150 A21 V.2 NKD 150 A21 V.2 NKP 160 A21 V.2 NKD 160 A21 V.2 NKP 200 A21 V.2 NKD 200 A21 V.2 NKP 250 A21 V.2 NKD 250 A21 V.2 NKP 315 A21 V.2...
-
Page 2: Table Of Contents
Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. Do not close or block the intake or extract vents in order to ensure the efficient air flow. Do not sit on the unit and do not put objects on it. - Page 3 This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the unit by a person responsible for their safety. Children should be supervised to ensure that they do not play with the unit.
-
Page 4: Purpose
NKP/NKD A21 V.2 PURPOSE The heater is designed for integration into a ventilation system and joint operation with an air handling unit equipped with a control system used to switch on the heater and control its operation. DELIVERY SET Name Number Heater Duct temperature sensor (only for... -
Page 5: Design And Operating Principle
Technical data Dimensions [mm] Power consumption Model Minimum air flow of electric Current [A] Ø D В heating elements [kW] NKP/NKD 125-0,6-1 NKP/NKD 125-0,8-1 NKP/NKD 125-1,2-1 NKP/NKD 150-0,8-1 NKP/NKD 150-1,2-1 NKP/NKD 150-1,7-1 NKP/NKD 150-2,0-1 NKP/NKD 160-0,8-1 NKP/NKD 160-1,2-1 NKP/NKD 160-1,7-1 NKP/NKD 160-2,0-1 NKP/NKD 200-1,2-1 NKP/NKD 200-1,7-1... -
Page 6: Mounting And Set-Up
NKP/NKD A21 V.2 MOUNTING AND SET-UP READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT. Attach the NKD heater to the air duct connected to the supply air spigot. Attach the NKP heater to the air duct connected to the intake air spigot. The heater is mounted horizontally or vertically. -
Page 7: Connection To Power Mains
Ensure air duct tightness at the sensor mounting location. CONNECTION TO POWER MAINS POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT. THE UNIT MUST BE CONNECTED TO POWER SUPPLY BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER’S LABEL. -
Page 8: Technical Maintenance
NKP/NKD A21 V.2 TECHNICAL MAINTENANCE The heater should be inspected periodically for mechanical damage, checking that the seals are tight and that the ducts are securely fastened to the heater. Heater maintenance includes: • Inspection of tightening of ground screw clamps and electric connections. •... -
Page 9: Storage And Transportation Regulations
STORAGE AND TRANSPORTATION REGULATIONS • Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range from +5 ˚С to +40 ˚С and relative humidity up to 70 %. • Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing deformation. -
Page 10: Manufacturer's Warranty
NKP/NKD A21 V.2 MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC. -
Page 11: Certificate Of Acceptance
CERTIFICATE OF ACCEPTANCE Unit Type Duct heater Model NK______________ Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are acknowledged and accepted. - Page 12 V249EN-01...
Need help?
Do you have a question about the NKP 125 A21 V.2 and is the answer not in the manual?
Questions and answers