Table of Contents
Advertisement
Quick Links
Touch Screen Control System Manual
Please read the manual carefully before installation & use
and keep the manual for further reference
Table of Contents
1. Introduction ...................................................................................................................................... 1
2. Controller Parameters And Dimension ............................................................................................. 2
3. Installations ....................................................................................................................................... 2
3.1 Installations of controller ......................................................................................................... 2
3.2 Installations of temp sensor ..................................................................................................... 3
3.3 Installations of lamp ................................................................................................................. 4
3.4 Installations of power wire ...................................................................................................... 4
4. Functions And Operations ................................................................................................................. 9
5. Troubleshooting .............................................................................................................................. 10
_______________________________________________________________________________________________________
TOLO SAUNA
info@tolosauna.com
Steamtec Sauna heater
www.tolosauna.com
1
Advertisement
Table of Contents
Summary of Contents for Steamtec KSA-Elegance
-
Page 1: Table Of Contents
Steamtec Sauna heater Touch Screen Control System Manual Please read the manual carefully before installation & use and keep the manual for further reference Table of Contents 1. Introduction ............................1 2. Controller Parameters And Dimension ..................... 2 3. Installations ............................2 3.1 Installations of controller ...................... -
Page 2: Introduction
Temperature Dimension controlling model (mins) display range (mm) range 1～60 or long-term KSA-Elegance 1～100℃ 60～100℃ 90x90x19 (CH) Table 1 3. Installations 3.1. Installations of controller Attention:The controller and central control box MUST be installed OUTSIDE the sauna room. The controller should be installed with height around 1.2 m OUTSIDE the sauna room but... -
Page 3: Installations Of Temp Sensor
CONNECTOR 4P CONTROLLER DOUBLE SIDED ADHESIVE WALL Figure 2 KSA-elegance controller installation 3.2. Installations of temp sensor Attention: Temperature sensor should be installed in sauna room but not directly above sauna heater, the height must be a minimum of 1800mm from floor. The horizontal distance... -
Page 4: Installations Of Lamp
3.3. Installations of lamp Open the cover of central control box, and connect lamp wire to the plug on circuit board of central control box. (See above figure 1) Only support DC 12V lamp. 3.4. Installations of power wire Caution ... - Page 5 Room Temp Sensor Over-heat protection KSA-Elegance CONTROLLER LAMP DC12V LED L1 L2 L3 Input POWER INPUT Output1 Input No connecting 380-415V 3N～ 50/60Hz 3KW -9 KW SAUNA HEATER European 215-240V 1 phase / L1 L2 L3 4.5～7.5kW 380-415V 3 Phase...
- Page 6 Room Temp Sensor Over-heat protection KSA-Elegance CONTROLLER LAMP DC12V LED U2 V2 W2 U1 V1 W1 L1 L2 L3 Input Output2 Output1 POWER INPUT 380-415V Input No connecting 3N～ 50/60Hz SAUNA HEATER 9～15kW L1 L2 L3 10.5 KW -15 KW...
- Page 7 Room Temp Sensor Over-heat protection KSA-Elegance CONTROLLER LAMP DC12V LED U3 V3 W3 U2 V2 W2 U1 V1 W1 Input Output3 Output2 Output1 POWER INPUT Input No connecting 380-415V 3N～ 50/60Hz 18KW -27 KW SAUNA HEATER L1 L2 L3 L1 L2 L3 18～22.5kW...
-
Page 8: Functions And Operations
4. Functions And Operations Figure 7 KSA Elegance Controller i. ON/OFF Touch to switch on and off of the whole system. The system has memory function, it will remember the last time temperature and time setting, however if the system has been powered off / outages, it will lose all its memory and will adapt the default temperature (60℃) and default time(45 minutes);... -
Page 9: Troubleshooting
iii. Working time set Touch to adjust the working time. The time setting range is from 1-60 minutes or CH, the default working time is 45 minutes. Touch “▲” or “▼” button to adjust the working time to the value you want, or touch“▲” button until the LCD displays “CH”, after that the system automatically enters long-term working mode.
Need help?
Do you have a question about the KSA-Elegance and is the answer not in the manual?
Questions and answers